JC-171
Based on 1 Customer Validation
JC-171 is a selective NLRP3 inflammasome inhibitor, with an IC50 of 8.45 μM for inhibiting LPS/ATP-induced interleukin-1β (IL-1β) release from J774A.1 macrophages.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit : 98.06%
- CAS. Nr.: 2112809-98-8
- Formel: C16H17ClN2O5S
- Molecular Weight:384.83
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Protokoll
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
HY-120007
JC124NLRP3 Inhibitor -
HY-17629
DapansutrileNLRP3 Inhibitor -
HY-103666
CY-09NLRP3 Inhibitor -
HY-156438
RuvonoflastNLRP3 Inhibitor -
HY-137245
EmlenoflastNLRP3 Inhibitor -
HY-130252
YQ128NLRP3 Inflammasome Inhibitor -
HY-N0139
TroxerutinNOD-like Receptor (NLR) Inhibitor -
HY-N0496
RuscogeninNOD-like Receptor (NLR) Inhibitor -
HY-136555
GSK717NOD2 Inhibitor -
HY-139396
BMS-986299NLRP3 Agonist -
HY-18639
Nodinitib-1NOD-like Receptor (NLR) Inhibitor -
HY-100691
NOD-IN-1NLR Inhibitor
Biologische Aktivität
Beschreibung
IC50 & Target
|
NLRP3 |
In Vitro
JC-171 (0-100 μM) blocks NLRP3 inflammasome activation and IL-1β production in primary macrophages dose dependently[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
-
Cell Line:J774A.1 murine macrophage cells
-
Concentration:0-100 μM.
-
Incubation Time:0.5 h (before LPS (1 μg/mL) treatment for 4.5 h).
-
Result:Inhibited the release of IL-1β in J774A.1 cells upon stimulation with LPS/ATP.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Mice immunized subcutaneously with 200 μg Myelin oligodendrocyte glycoprotein (MOG) 35–55 peptide emulsified in Complete Freund’s Adjuvant (CFA) on day 0 followed by injection of 200 ng of pertussis toxin.
-
Dosage:100 mg/kg, 10 mg/kg.
-
Administration:IP days 0, 1 and 2; and every other days thereafter (100 mg/kg).
Initiated when the clinical scores of individual mice have reached 1 (flaccid tail), and given every other day (10 mg/kg).
-
Result:Efficiently suppressed EAE progression compared with vehicle treatment.
Resulted in a substantial decrease in the frequency of MOG35–55-specific Th17 cells in the spleens and spinal cords of EAE mice.
Chemical Information
-
CAS. Nr. 2112809-98-8
-
Appearance Solid
-
Molecular Weight 384.83
-
Formel C16H17ClN2O5S
-
Color White to off-white
-
SMILES
O=C(NCCC1=CC=C(S(=O)(NO)=O)C=C1)C2=CC(Cl)=CC=C2OC
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Lösungsmittel & Löslichkeit
In Vitro:
DMSO : 250 mg/mL (649.64 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.40 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protokoll
-
Pyroptosis Solutions
Pyroptosis is a lytic inflammatory cell-death pathway executed by gasdermin pores, most classically through inflammasome-mediated activation of caspase-1, cleavage of gasdermin D, membrane pore formation, LDH release, and secretion of IL-1β and IL-18. The canonical pathway is commonly modeled by priming cells with an inflammatory signal such as LPS to induce pro-IL-1β and inflammasome components, followed by an activation signal such as ATP or nigericin to activate NLRP3, ASC speck formation, caspase-1 cleavage, GSDMD cleavage, cytokine release, and pyroptotic membrane rupture. The non-canonical pathway is triggered when cytosolic LPS activates mouse caspase-11 or human caspase-4/5, leading to GSDMD cleavage and pyroptosis, and this can secondarily activate NLRP3-dependent IL-1β release. Pyroptosis is linked to inflammatory injury, infection, cancer, liver disease, ocular disease, placental inflammation, and other disease phenotypes, but unresolved questions include which gasdermin fam
Reinheit & Dokumentation
-
Data Sheet (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Chunqing Guo, et al. Development and Characterization of a Hydroxyl-Sulfonamide Analogue, 5-Chloro-N-[2-(4-hydroxysulfamoyl-phenyl)-ethyl]-2-methoxy-benzamide, as a Novel NLRP3 Inflammasome Inhibitor for Potential Treatment of Multiple Sclerosis. ACS Chem Neurosci. 2017 Oct 18;8(10):2194-2201. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5986 mL | 12.9928 mL | 25.9855 mL | 64.9638 mL |
| 5 mM | 0.5197 mL | 2.5986 mL | 5.1971 mL | 12.9928 mL | |
| 10 mM | 0.2599 mL | 1.2993 mL | 2.5986 mL | 6.4964 mL | |
| 15 mM | 0.1732 mL | 0.8662 mL | 1.7324 mL | 4.3309 mL | |
| 20 mM | 0.1299 mL | 0.6496 mL | 1.2993 mL | 3.2482 mL | |
| 25 mM | 0.1039 mL | 0.5197 mL | 1.0394 mL | 2.5986 mL | |
| 30 mM | 0.0866 mL | 0.4331 mL | 0.8662 mL | 2.1655 mL | |
| 40 mM | 0.0650 mL | 0.3248 mL | 0.6496 mL | 1.6241 mL | |
| 50 mM | 0.0520 mL | 0.2599 mL | 0.5197 mL | 1.2993 mL | |
| 60 mM | 0.0433 mL | 0.2165 mL | 0.4331 mL | 1.0827 mL | |
| 80 mM | 0.0325 mL | 0.1624 mL | 0.3248 mL | 0.8120 mL | |
| 100 mM | 0.0260 mL | 0.1299 mL | 0.2599 mL | 0.6496 mL |
JC-171 Related Classifications
HY-117432 Related Classifications
Powered by Bioz