XMD8-87
Based on 1 Customer Validation
XMD8-87 is a potent TNK2 inhibitor with IC50 values of 38 and 113 nM for the D163E and R806Q mutations, respectively.
For research use only. We do not sell to patients.
- Purity: 99.57%
- CAS No.: 1234480-46-6
- Formula: C24H27N7O2
- Molecular Weight:445.52
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Protocol
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
IC50: 38 nM (TNK2, D163E mutation), 113 nM (TNK2, R806Q mutation)[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| BaF3 | IC50 |
0.19 μM
Compound: XMD8-87
|
Inhibition of TNK2 D163E mutant in human BaF3 cells assessed as reduction in cell viability incubated for 72 hrs by CellTiter-Glo luminescent cell viability assay
Inhibition of TNK2 D163E mutant in human BaF3 cells assessed as reduction in cell viability incubated for 72 hrs by CellTiter-Glo luminescent cell viability assay
|
[PMID: 31928839] |
| HeLa | IC50 |
1200 nM
Compound: XMD8-87
|
Inhibition of ERK5 in human HeLa cells assessed as reduction in EGF-induced ERK5 autophosphorylation pretreated for 1 hr followed by EGF stimulation and measured after 17 mins by 32p kinase assay
Inhibition of ERK5 in human HeLa cells assessed as reduction in EGF-induced ERK5 autophosphorylation pretreated for 1 hr followed by EGF stimulation and measured after 17 mins by 32p kinase assay
|
[PMID: 32530623] |
XMD8-87 potently inhibits the growth of the TNK2 mutant expressing cell lines while having little or no effect on the control cells out to the highest tested concentrations (1,000 nM). XMD8-87 has IC50s of 38 nM and 113 nM for the D163E and R806Q mutations. The effects of XMD8-87 on TNK2 cell lines are largely due to on-target effects on TNK2. Auto-phosphorylation of overexpressed TNK2 mutants could be blocked with TNK2 inhibitor XMD8-87[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1234480-46-6
-
Appearance Solid
-
Molecular Weight 445.52
-
Formula C24H27N7O2
-
Color White to yellow
-
SMILES
O=C1C2=CC=CC=C2N(C)C3=NC(NC4=CC=C(N5CCN(C)CC5)C=C4OC)=NC=C3N1
-
Synonyms
ACK1-B19
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvent & Solubility
DMSO : ≥ 26 mg/mL (58.36 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.67 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.08 mg/mL (4.67 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.08 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Kinase targets are tested with biochemical enzymatic kinase assays using the SelectScreen Kinase Profiling Service to determine IC50 values. The compounds (XMD8-87) are assayed at 10 concentrations (3-fold serial dilutions starting from 1 μM) at an ATP concentration equal to the ATP Km[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Cells are treated with the following inhibitors for 72 hours: dasatinib, AIM-100, XMD8-87 and XMD16-5. Cell viability is measured using a methanethiosulfonate (MTS)-based assay and absorbance (490 nm) is read at 1 and 3 hours after adding reagent[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2446 mL | 11.2228 mL | 22.4457 mL | 56.1142 mL |
| 5 mM | 0.4489 mL | 2.2446 mL | 4.4891 mL | 11.2228 mL | |
| 10 mM | 0.2245 mL | 1.1223 mL | 2.2446 mL | 5.6114 mL | |
| 15 mM | 0.1496 mL | 0.7482 mL | 1.4964 mL | 3.7409 mL | |
| 20 mM | 0.1122 mL | 0.5611 mL | 1.1223 mL | 2.8057 mL | |
| 25 mM | 0.0898 mL | 0.4489 mL | 0.8978 mL | 2.2446 mL | |
| 30 mM | 0.0748 mL | 0.3741 mL | 0.7482 mL | 1.8705 mL | |
| 40 mM | 0.0561 mL | 0.2806 mL | 0.5611 mL | 1.4029 mL | |
| 50 mM | 0.0449 mL | 0.2245 mL | 0.4489 mL | 1.1223 mL |
XMD8-87 Related Classifications
HY-15811 Related Classifications
Powered by Bioz