Fluxametamide
Based on 3 publication(s) in Google Scholar
Fluxametamide is an insecticide with wide spectrum, acts as an antagonist of GABA- and glutamate-gated chloride channels, with IC50 of 1.95 nM and 225 nM for M. domestica GABACls and GluCls.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.45%
- CAS No.: 928783-29-3
- Formule: C20H16Cl2F3N3O3
- Masse moléculaire:474.26
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Membrane Transporter/Ion Channel Compound Library
HY-L011
-
Neuronal Signaling Compound Library
HY-L013
-
Neurotransmitter Receptor Compound Library
HY-L062
-
Anti-Alzheimer's Disease Compound Library
HY-L069
-
Anti-Parkinson's Disease Compound Library
HY-L085
-
Neurodegenerative Disease-related Compound Library
HY-L086
-
GABA Receptor Compound Library
HY-L120
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Ion Channel Compound Library
HY-L166
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Environmental Pollutant Compound Library
HY-L247
Publications Citing Use of MedChemExpress (MCE) Fluxametamide
More
Activité biologique
IC50: 1.95 nM (M. domestica GABACls), 225 nM (M. domestica GluCls)[1]
Fluxametamide is an antagonist of GABA- and glutamate-gated chloride channels, dose-dependently inhibits currents induced by GABA and glutamate in M. domestica GABACls and GluCls, with IC50 values of 1.95 (1.18-3.21) nM and 225 (137-372) nM, respectively, and displays potent antagonistic activity against T. urticae GABACls with an IC50 of 0.219 (0.127-0.381) nM. Fluxametamide inhibits GABA responses in the wild-type L. striatellus GABACls with IC50 values of 1.40 (0.57-3.29) nM; in the A2′N mutant GABACls, the IC50 value is 3.51 (2.17-5.69) nM. Moreover, Fluxametamide scarcely inhibits GABA (EC50)-induced currents in rat GABACls at 10 μM and with no inhibition on glycine (EC50)-induced current in human α1 GlyCls at tested concentrations[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 928783-29-3
-
Appearance Solid
-
Masse moléculaire 474.26
-
Formule C20H16Cl2F3N3O3
-
Color White to off-white
-
SMILES
FC(F)(C1(C2=CC(Cl)=CC(Cl)=C2)CC(C3=CC(C)=C(C(N/C=N/OC)=O)C=C3)=NO1)F
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (3)
-
Journal Impact Factor
-
Most Recent
Solvant et solubilité
DMSO : 125 mg/mL (263.57 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.39 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1085 mL | 10.5427 mL | 21.0855 mL | 52.7137 mL |
| 5 mM | 0.4217 mL | 2.1085 mL | 4.2171 mL | 10.5427 mL | |
| 10 mM | 0.2109 mL | 1.0543 mL | 2.1085 mL | 5.2714 mL | |
| 15 mM | 0.1406 mL | 0.7028 mL | 1.4057 mL | 3.5142 mL | |
| 20 mM | 0.1054 mL | 0.5271 mL | 1.0543 mL | 2.6357 mL | |
| 25 mM | 0.0843 mL | 0.4217 mL | 0.8434 mL | 2.1085 mL | |
| 30 mM | 0.0703 mL | 0.3514 mL | 0.7028 mL | 1.7571 mL | |
| 40 mM | 0.0527 mL | 0.2636 mL | 0.5271 mL | 1.3178 mL | |
| 50 mM | 0.0422 mL | 0.2109 mL | 0.4217 mL | 1.0543 mL | |
| 60 mM | 0.0351 mL | 0.1757 mL | 0.3514 mL | 0.8786 mL | |
| 80 mM | 0.0264 mL | 0.1318 mL | 0.2636 mL | 0.6589 mL | |
| 100 mM | 0.0211 mL | 0.1054 mL | 0.2109 mL | 0.5271 mL |
Fluxametamide Related Classifications
HY-108690 Related Classifications
Powered by Bioz