FR054
Based on 1 Customer Validation
FR054 is an inhibitor of the HBP enzyme PGM3, with a remarkable anti-breast cancer effect.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.46%
- CAS No.: 35954-65-5
- Formule: C14H19NO8
- Masse moléculaire:329.30
-
Stockage:
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
FR054 (0.5-1 mM, 24-48 h) induces an early proliferation arrest followed by a marked cell death increase in breast cancer cells and induces apoptosis. The effect of FR054 occurs through PGM3 inhibition instead of other off-target effects[1].
FR054 (250 μM, 24 h) treatment efficiently affects both N- and O-glycosylation levels in MDA-MB-231 cells[1].
FR054 induces endoplasmic reticulum (ER) stress and a ROS-dependent apoptotic cell death[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MDA-MB-231 cells.
-
Concentration:0.5-1 mM.
-
Incubation Time:48 h.
-
Result:Reduced viability and a significant increase of the apoptosis as compared to the control clone.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Mice were subcutaneously injected with MDA-MB-231 cells[1].
-
Dosage:1000 mg/kg.
-
Administration:IP, single or fractionated dose (twice a day 500 mg/kg/dose).
-
Result:Appears to have an in vivo antitumor efficacy that is higher when administered twice a day compared to single administration.
Chemical Information
-
CAS No. 35954-65-5
-
Appearance Oil
-
Masse moléculaire 329.30
-
Formule C14H19NO8
-
Color Colorless to light yellow
-
SMILES
CC(O[C@@H]1[C@]2([H])[C@](OC(C)=N2)([H])O[C@@H]([C@H]1OC(C)=O)COC(C)=O)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvant et solubilité
DMSO : 100 mg/mL (303.67 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.59 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 50% PEG300 50% Saline
Solubility: 25 mg/mL (75.92 mM); Clear solution; Need ultrasonic
Add each solvent one by one: 15% Cremophor EL 85% Saline
Solubility: 25 mg/mL (75.92 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (277 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0367 mL | 15.1837 mL | 30.3674 mL | 75.9186 mL |
| 5 mM | 0.6073 mL | 3.0367 mL | 6.0735 mL | 15.1837 mL | |
| 10 mM | 0.3037 mL | 1.5184 mL | 3.0367 mL | 7.5919 mL | |
| 15 mM | 0.2024 mL | 1.0122 mL | 2.0245 mL | 5.0612 mL | |
| 20 mM | 0.1518 mL | 0.7592 mL | 1.5184 mL | 3.7959 mL | |
| 25 mM | 0.1215 mL | 0.6073 mL | 1.2147 mL | 3.0367 mL | |
| 30 mM | 0.1012 mL | 0.5061 mL | 1.0122 mL | 2.5306 mL | |
| 40 mM | 0.0759 mL | 0.3796 mL | 0.7592 mL | 1.8980 mL | |
| 50 mM | 0.0607 mL | 0.3037 mL | 0.6073 mL | 1.5184 mL | |
| 60 mM | 0.0506 mL | 0.2531 mL | 0.5061 mL | 1.2653 mL | |
| 80 mM | 0.0380 mL | 0.1898 mL | 0.3796 mL | 0.9490 mL | |
| 100 mM | 0.0304 mL | 0.1518 mL | 0.3037 mL | 0.7592 mL |
FR054 Related Classifications
HY-124909A Related Classifications
Powered by Bioz