MIF098
Based on 1 Customer Validation
MIF098 is a macrophage migration inhibitory factor (MIF) antagonist. MIF098 inhibits proliferation, migration and fibrosis of pulmonary smooth muscle cells. MIF098 can be used for immunoinflammation-related disease research.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.99%
- CAS No.: 1208448-95-6
- Formule: C15H13NO3
- Masse moléculaire:255.27
-
Stockage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
MIF098 (0-10 μM, 48 h) inhibits mPASMC cell proliferation and migration in a concentration-dependent manner, by blocking the migration inhibitory factor (MIF) pathway[1].
MIF098 reduces collagen synthesis and pulmonary artery fibrosis by inhibiting the TGFβ1/Smad2/3 pathway[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Mouse pulmonary artery smooth muscle cells (mPASMCs)
-
Concentration:0-10 μM
-
Incubation Time:48 hours
-
Result:Reduced expression of cell cycle related proteins such as cyclin D1, CDK4 and CDK6 in PDGF-BB and increased expression of cell-cycle arrest proteins such as P53 and P21.
Reduced TGFβ1-induced fibronectin (FN), collagen I (col I), and collagen II (col II) expression and phosphorylation of Smad2 and Smad3.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Hypoxic male C57BL/6J mice[1]
-
Dosage:40 mg/kg
-
Administration:Intraperitoneal injection; once a day; 4 weeks
-
Result:Reduced right ventricular systolic pressure (RVSP), percentage medial wall thickness, muscularization and right ventricle collagen deposition.
Decreased percentage of collagen fibers in pulmonary artery (PA).
Chemical Information
-
CAS No. 1208448-95-6
-
Appearance Solid
-
Masse moléculaire 255.27
-
Formule C15H13NO3
-
Color White to off-white
-
SMILES
O=C1OC2=CC=C(C)C=C2N1CC3=CC=CC(O)=C3
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvant et solubilité
DMSO : 180 mg/mL (705.14 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (19.59 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 5 mg/mL (19.59 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (277 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.9174 mL | 19.5871 mL | 39.1742 mL | 97.9355 mL |
| 5 mM | 0.7835 mL | 3.9174 mL | 7.8348 mL | 19.5871 mL | |
| 10 mM | 0.3917 mL | 1.9587 mL | 3.9174 mL | 9.7936 mL | |
| 15 mM | 0.2612 mL | 1.3058 mL | 2.6116 mL | 6.5290 mL | |
| 20 mM | 0.1959 mL | 0.9794 mL | 1.9587 mL | 4.8968 mL | |
| 25 mM | 0.1567 mL | 0.7835 mL | 1.5670 mL | 3.9174 mL | |
| 30 mM | 0.1306 mL | 0.6529 mL | 1.3058 mL | 3.2645 mL | |
| 40 mM | 0.0979 mL | 0.4897 mL | 0.9794 mL | 2.4484 mL | |
| 50 mM | 0.0783 mL | 0.3917 mL | 0.7835 mL | 1.9587 mL | |
| 60 mM | 0.0653 mL | 0.3265 mL | 0.6529 mL | 1.6323 mL | |
| 80 mM | 0.0490 mL | 0.2448 mL | 0.4897 mL | 1.2242 mL | |
| 100 mM | 0.0392 mL | 0.1959 mL | 0.3917 mL | 0.9794 mL |
MIF098 Related Classifications
HY-147390 Related Classifications
Powered by Bioz