SJ3149
Based on 1 publication(s) in Google Scholar
SJ3149 is a selective and potent molecular glue degrader of CK1α protein with broad antiproliferative activity. SJ3149 can be used in cancer research.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.48%
- CAS No.: 3026986-17-1
- Formule: C20H16N4O4
- Masse moléculaire:376.37
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Cell Cycle/DNA Damage Compound Library
HY-L004
-
Stem Cell Signaling Compound Library
HY-L017
-
Wnt/Hedgehog/Notch Compound Library
HY-L020
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
-
Molecular Glue Compound Library
HY-L137
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
-
Molecular Glue-like Compound Library
HY-L918
Publications Citing Use of MedChemExpress (MCE) SJ3149
More
Activité biologique
SJ3149 (1 nM-10 µM; 4 h) degrades CK1α protein in MOLM-13 cells by 50 % at a concentration of 4 nM, while at a dose of 10 μM, the level of IKZF2 in the cells is only reduced by about 40 %[1]. SJ3149 inhibits the growth of MOLM-13 cells with an IC50 of 14 nM and reduces CK1a abundance with a DC50 value of 11 nM and a Dmax value of 88 %[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:NSG mice transplanted with MOLM-13 cells[1]
-
Dosage:50 mg/kg
-
Administration:i.p.; 1 time per day for 2 days or 2 times per day for 2 days
-
Result:Had stronger CK1α protein degradation ability at twice-daily dosing frequency.
Chemical Information
-
CAS No. 3026986-17-1
-
Appearance Solid
-
Masse moléculaire 376.37
-
Formule C20H16N4O4
-
Color White to light yellow
-
SMILES
O=C1N(C2C(NC(CC2)=O)=O)CC3=C1C=CC(NC4=NOC5=C4C=CC=C5)=C3
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
Solvant et solubilité
DMSO : 75 mg/mL (199.27 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 3 mg/mL (7.97 mM); Clear solution
This protocol yields a clear solution of ≥ 3 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (30.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 3 mg/mL (7.97 mM); Clear solution
This protocol yields a clear solution of ≥ 3 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (30.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6570 mL | 13.2848 mL | 26.5696 mL | 66.4240 mL |
| 5 mM | 0.5314 mL | 2.6570 mL | 5.3139 mL | 13.2848 mL | |
| 10 mM | 0.2657 mL | 1.3285 mL | 2.6570 mL | 6.6424 mL | |
| 15 mM | 0.1771 mL | 0.8857 mL | 1.7713 mL | 4.4283 mL | |
| 20 mM | 0.1328 mL | 0.6642 mL | 1.3285 mL | 3.3212 mL | |
| 25 mM | 0.1063 mL | 0.5314 mL | 1.0628 mL | 2.6570 mL | |
| 30 mM | 0.0886 mL | 0.4428 mL | 0.8857 mL | 2.2141 mL | |
| 40 mM | 0.0664 mL | 0.3321 mL | 0.6642 mL | 1.6606 mL | |
| 50 mM | 0.0531 mL | 0.2657 mL | 0.5314 mL | 1.3285 mL | |
| 60 mM | 0.0443 mL | 0.2214 mL | 0.4428 mL | 1.1071 mL | |
| 80 mM | 0.0332 mL | 0.1661 mL | 0.3321 mL | 0.8303 mL | |
| 100 mM | 0.0266 mL | 0.1328 mL | 0.2657 mL | 0.6642 mL |
SJ3149 Related Classifications
HY-160444 Related Classifications
Powered by Bioz