ADAM8-IN-1
Based on 1 Customer Validation
ADAM8-IN-1 is a potent ADAM8 inhibitor with an IC50 value of 73 nM.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.30%
- CAS. Nr.: 2758892-64-5
- Formel: C44H44Br4N6O12S2
- Molecular Weight:1232.60
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
Chemical Information
-
CAS. Nr. 2758892-64-5
-
Appearance Solid
-
Molecular Weight 1232.60
-
Formel C44H44Br4N6O12S2
-
Color White to off-white
-
SMILES
O=C(NCCC[C@@H](NS(=O)(C1=CC=C(OCC2=CC(Br)=CC(Br)=C2)C=C1)=O)C(NO)=O)C3=CC=CC(C(NCCC[C@@H](NS(=O)(C4=CC=C(OCC5=CC(Br)=CC(Br)=C5)C=C4)=O)C(NO)=O)=O)=C3
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (81.13 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (2.03 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (266 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.8113 mL | 4.0565 mL | 8.1129 mL | 20.2823 mL |
| 5 mM | 0.1623 mL | 0.8113 mL | 1.6226 mL | 4.0565 mL | |
| 10 mM | 0.0811 mL | 0.4056 mL | 0.8113 mL | 2.0282 mL | |
| 15 mM | 0.0541 mL | 0.2704 mL | 0.5409 mL | 1.3522 mL | |
| 20 mM | 0.0406 mL | 0.2028 mL | 0.4056 mL | 1.0141 mL | |
| 25 mM | 0.0325 mL | 0.1623 mL | 0.3245 mL | 0.8113 mL | |
| 30 mM | 0.0270 mL | 0.1352 mL | 0.2704 mL | 0.6761 mL | |
| 40 mM | 0.0203 mL | 0.1014 mL | 0.2028 mL | 0.5071 mL | |
| 50 mM | 0.0162 mL | 0.0811 mL | 0.1623 mL | 0.4056 mL | |
| 60 mM | 0.0135 mL | 0.0676 mL | 0.1352 mL | 0.3380 mL | |
| 80 mM | 0.0101 mL | 0.0507 mL | 0.1014 mL | 0.2535 mL |
Powered by Bioz