BMS-986224
Based on 1 Customer Validation
BMS-986224 is a potent, selective and orally active APJ receptor agonist (Kd = 0.3 nM). BMS-986224 exhibits similar receptor binding and signaling profile to (Pyr1) apelin-13. BMS-986224 has the potential for the research of heart failure.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.44%
- CAS. Nr.: 2055200-88-7
- Formel: C24H23ClN4O6
- Molecular Weight:498.92
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
Kd: 0.3 nM (APJ receptor)[1]
BMS-986224 fully inhibits forskolin-mediated cAMP production, with an EC50 for human APJ of 0.02 nM. BMS-986224 (0-100 nM) fully stimulates β-arrestin recruitment, ERK phosphorylation, and APJ internalization in Chinese hamster ovary-K1 or HEK293 ZF cells[1].
BMS-986224 is a potent and selective APJ receptor agonist that exhibits a similar signaling profile to (Pyr1) apelin-13[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Sprague-Dawley rats (renal hypertensive rat model)[1]
-
Dosage:0.192 mg/kg or 3 mg/kg
-
Administration:SC infusion; daily; Initiated 3 days before surgery and continued for 7 days after surgery
-
Result:The achieved steady-state plasma concentrations during 10-day infusion were 102 and 2686 nmol/L at low dose and HD, respectively. At the low dose, BMS-986224 increased SV and CO without affecting other measured parameters, including the measured diastolic parameters, cardiac fibrosis, and heart weight in RHR.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS. Nr. 2055200-88-7
-
Appearance Solid
-
Molecular Weight 498.92
-
Formel C24H23ClN4O6
-
Color Off-white to light yellow
-
SMILES
O=C1NC(COCC)=C(C2=C(OC)C=CC=C2OC)C(O)=C1C3=NN=C(CC4=NC=C(C=C4)Cl)O3
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 20 mg/mL (40.09 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2 mg/mL (4.01 mM); Clear solution
This protocol yields a clear solution of ≥ 2 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0043 mL | 10.0216 mL | 20.0433 mL | 50.1082 mL |
| 5 mM | 0.4009 mL | 2.0043 mL | 4.0087 mL | 10.0216 mL | |
| 10 mM | 0.2004 mL | 1.0022 mL | 2.0043 mL | 5.0108 mL | |
| 15 mM | 0.1336 mL | 0.6681 mL | 1.3362 mL | 3.3405 mL | |
| 20 mM | 0.1002 mL | 0.5011 mL | 1.0022 mL | 2.5054 mL | |
| 25 mM | 0.0802 mL | 0.4009 mL | 0.8017 mL | 2.0043 mL | |
| 30 mM | 0.0668 mL | 0.3341 mL | 0.6681 mL | 1.6703 mL | |
| 40 mM | 0.0501 mL | 0.2505 mL | 0.5011 mL | 1.2527 mL |
BMS-986224 Related Classifications
HY-139485 Related Classifications
Powered by Bioz