Incensole
Based on 1 Customer Validation
Incensole, a 14-membered diterpenoid, is isolated from both essential oils and resins of frankincense. Incensole has shown anti-inflammatory and anti-depression activities due to their ability to activate ion channels in the brain to alleviate anxiety or depression.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 98.12%
- No. CAS: 22419-74-5
- Fòrmula: C20H34O2
- Peso molecular:306.48
-
Almacenamiento:
-20°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HEK293 | EC50 |
2.1 μM
Compound: 1a
|
Activation of rat TRPV3 overexpressed in HEK293 cells assessed as increase in 2-aminoethoxydiphenyl borate-induced intracellular calcium concentration by Fluo-4AM dye-based spectrofluorometry
Activation of rat TRPV3 overexpressed in HEK293 cells assessed as increase in 2-aminoethoxydiphenyl borate-induced intracellular calcium concentration by Fluo-4AM dye-based spectrofluorometry
|
[PMID: 27352042] |
| HEK293 | IC50 |
2.1 μM
Compound: 1a
|
Antagonist activity at rat TRPV3 overexpressed in HEK293 cells assessed as inhibition of thymol-induced increase in intracellular Ca2+ levels preincubated for 5 mins prior to thymol-stimulation by Fluo-4AM dye-based spectrofluorometry
Antagonist activity at rat TRPV3 overexpressed in HEK293 cells assessed as inhibition of thymol-induced increase in intracellular Ca2+ levels preincubated for 5 mins prior to thymol-stimulation by Fluo-4AM dye-based spectrofluorometry
|
[PMID: 27352042] |
| HeLa | IC50 |
15.84 μM
Compound: 1a
|
Inhibition of IFNgamma-induced STAT3 activation in human HeLa cells expressing STAT3 (unknown origin) preincubated for 15 mins followed by IFN-gamma addition measured after 6 hrs by luciferase reporter gene assay
Inhibition of IFNgamma-induced STAT3 activation in human HeLa cells expressing STAT3 (unknown origin) preincubated for 15 mins followed by IFN-gamma addition measured after 6 hrs by luciferase reporter gene assay
|
[PMID: 27352042] |
| NIH3T3 | IC50 |
>50 μM
Compound: 1a
|
Inhibition of TNFalpha-induced NFkappaB activation in mouse NIH-3T3 cells expressing NFkappaB (unknown origin) preincubated for 15 mins followed by TNFalpha addition measured after 6 hrs by luciferase reporter gene assay
Inhibition of TNFalpha-induced NFkappaB activation in mouse NIH-3T3 cells expressing NFkappaB (unknown origin) preincubated for 15 mins followed by TNFalpha addition measured after 6 hrs by luciferase reporter gene assay
|
[PMID: 27352042] |
Chemical Information
-
No. CAS 22419-74-5
-
Appearance Liquid (Density: 0.959 g/cm3)
-
Peso molecular 306.48
-
Fòrmula C20H34O2
-
Color Colorless to light yellow
-
SMILES
O[C@@H]1[C@@](O2)(C)CC[C@@]2(C(C)C)C/C=C(C)/CC/C=C(C)/CC1
-
Structure Classification
-
Initial Source
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
-20°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Solvente y solubilidad
DMSO : 250 mg/mL (815.71 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (6.79 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (277 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2629 mL | 16.3143 mL | 32.6286 mL | 81.5714 mL |
| 5 mM | 0.6526 mL | 3.2629 mL | 6.5257 mL | 16.3143 mL | |
| 10 mM | 0.3263 mL | 1.6314 mL | 3.2629 mL | 8.1571 mL | |
| 15 mM | 0.2175 mL | 1.0876 mL | 2.1752 mL | 5.4381 mL | |
| 20 mM | 0.1631 mL | 0.8157 mL | 1.6314 mL | 4.0786 mL | |
| 25 mM | 0.1305 mL | 0.6526 mL | 1.3051 mL | 3.2629 mL | |
| 30 mM | 0.1088 mL | 0.5438 mL | 1.0876 mL | 2.7190 mL | |
| 40 mM | 0.0816 mL | 0.4079 mL | 0.8157 mL | 2.0393 mL | |
| 50 mM | 0.0653 mL | 0.3263 mL | 0.6526 mL | 1.6314 mL | |
| 60 mM | 0.0544 mL | 0.2719 mL | 0.5438 mL | 1.3595 mL | |
| 80 mM | 0.0408 mL | 0.2039 mL | 0.4079 mL | 1.0196 mL | |
| 100 mM | 0.0326 mL | 0.1631 mL | 0.3263 mL | 0.8157 mL |
Incensole Related Classifications
HY-N4097 Related Classifications
Powered by Bioz