BI-78D3
Based on 1 publication(s) in Google Scholar
BI-78D3 functions as a substrate competitive inhibitor of JNK, inhibit the JNK kinase activity (IC50=280 nM).
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.85%
- No. CAS: 883065-90-5
- Fòrmula: C13H9N5O5S2
- Peso molecular:379.37
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Protocolo
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Immunology/Inflammation Compound Library
HY-L007
-
Kinase Inhibitor Library
HY-L009
-
MAPK Compound Library
HY-L010
-
Anti-Cancer Compound Library
HY-L025
-
Reprogramming Compound Library
HY-L039
-
Anti-diabetic Compound Library
HY-L040
-
Oxygen Sensing Compound Library
HY-L045
-
Anti-Parkinson's Disease Compound Library
HY-L085
-
Anti-Obesity Compound Library
HY-L087
-
Transcription Factor-Targeted Library
HY-L090
-
Targeted Diversity Library
HY-L099
-
Antidepressant Compound Library
HY-L108
-
Anti-Pulmonary Fibrosis Compound Library
HY-L125
-
Heterocyclic Compound Library
HY-L138
-
Pain-Related Compound Library
HY-L139
-
Serine/Threonine Kinase Inhibitor Library
HY-L164
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
Cell Proliferation Compound Library
HY-L201
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
Publications Citing Use of MedChemExpress (MCE) BI-78D3
More
Actividad biológica
|
JNK 280 nM (IC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HeLa | EC50 |
12.4 μM
Compound: 24, BI-78D3
|
Inhibition of TNF-alpha-stimulated c-Jun phosphorylation in human HeLa cells treated 60 mins before TNFalpha challenge measured after 30 mins TR-FRET analysis
Inhibition of TNF-alpha-stimulated c-Jun phosphorylation in human HeLa cells treated 60 mins before TNFalpha challenge measured after 30 mins TR-FRET analysis
|
[PMID: 20146479] |
BI-78D3, dose-dependently inhibits the phosphorylation of JNK substrates both in vitro and in cell. BI-78D3 is able to compete with the D-domain of JIP1 (amino acids 153-163; pepJIP1) for JNK1 binding (IC50=500 nM). Using the same in vitro LanthaScreen kinase assay and the same ATF2 substrate, BI-78D3 is found to be 100-fold less active vs. p38α, a member of the MAPK family with high structural similarity to JNK, and completely inactive against mTOR and PI3-kinase (α-isoform), both unrelated protein kinases. Furthermore, Lineweaver-Burk analysis clearly indicates that BI-78D3 is competitive with ATF2 for binding to JNK1 with an apparent Ki value of 200 nM. In an attempt to profile the properties of BI-78D3 in the context of a complex cellular milieu, the cell-based LanthaScreen kinase assay is used. In this assay BI-78D3 is able to inhibit TNF-α stimulated phosphorylation of c-Jun in cell (EC50=12.4 μM)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 883065-90-5
-
Appearance Solid
-
Peso molecular 379.37
-
Fòrmula C13H9N5O5S2
-
Color White to off-white
-
SMILES
O=C1N(C2=CC=C(OCCO3)C3=C2)C(SC4=NC=C([N+]([O-])=O)S4)=NN1
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Life Sci
Icariin protects rabbit BMSCs against OGD-induced apoptosis by inhibiting ERs-mediated autophagy via MAPK signaling pathway. [Abstract]2020 Jul 15;253:117730. PMID: 32348838
Solvente y solubilidad
DMSO : 100 mg/mL (263.59 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.59 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.59 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocolo
The cell based kinase assays for c-Jun and ATF2 phosphorylation carry out by using the LanthaScreen c-Jun (1-79) HeLa and LanthaScreen ATF2 (19-106) A549 cell lines which stably express GFP-c-Jun 1-79 and GFP-ATF2 19-106, respectively. Phosphorylation is determined by measuring the time resolved FRET (TR-FRET) between a terbium labeled phospho-specific antibody and the GFP-fusion protein. The cells are plated in white tissue culture treated 384 well plates at a density of 10,000 cell per well in 32 μl assay medium (supplemented with 1% charcoal/dextran-treated FBS, 100 U/mL Penicillin and 100 μg/mL Streptomycin, 0.1 mM nonessential amino acids, 1 mM sodium pyruvate, 25 mM Hepes, pH 7.3, and lacking phenol red). After overnight incubation, cells are pretreated for 60 min with BI-78D3 (0.001, 0.01, 0.1, 1, 10, and 100 μM) followed by 30 min of stimulation with 2 ng/mL of TNF-α that stimulates both JNK and p38. The medium is then removed by aspiration and the cells are lysed by adding 20 μL of lysis buffer (20 mM Tris•HCl, pH 7.6, 5 mM EDTA, 1% Nonidet P-40 substitute, 5 mM NaF, 150 mM NaCl, and 1:100 protease and phosphatase inhibitor mix, SIGMA P8340 and P2850, respectively). The lysis buffer includs 2 nM of the terbium-labeled anti-pc-Jun (pSer73) or anti-pATF2 (pThr71) detection antibodies. After allowing the assay to equilibrate for 1 h at room temperature, TR-FRET emission ratios are determined on a BMG Pherastar fluorescence plate reader (excitation at 340 nm, emission 520 nm and 490 nm; 100 μs lag time, 200 μs integration time, emission ratio=Em520/Em 490)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Mice[1]
ConA and BI-78D3 is injected i.v. at 10 mg/kg into 6 to 8 weeks old male BL/6 mice. For partial hepatectomy, mice are anesthetized with isofluorane and subjected to midventral laparotomy followed by removal of the left lateral and median lobes. Animals are killed, blood is collected by cardiac puncture, and livers are surgically removed. Serum is separated and analyzed for alanine-aminotranferase levels[1].
Eleven-week-old male BKS.Cg-+Leprdb/+Leprdb/OlaHsd db/db mice are randomized based on blood glucose levels acclimated three days before drug dosing. Blood glucose is read by using a hand-held glucose meter (Mice are fasted 6 h before i.p. (i.p.) administration of 25 mg/kg BI-78D3. Thirty minutes after test article administration, Bovine Insulin (I-0516 at 0.75 mg/kg) is administered via i.p. injection. Blood samples are taken at designated time points and blood glucose levels are measured as described. Food is returned three hours after test article administration[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureza y Documentación
-
Ficha de datos (284 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6359 mL | 13.1797 mL | 26.3595 mL | 65.8987 mL |
| 5 mM | 0.5272 mL | 2.6359 mL | 5.2719 mL | 13.1797 mL | |
| 10 mM | 0.2636 mL | 1.3180 mL | 2.6359 mL | 6.5899 mL | |
| 15 mM | 0.1757 mL | 0.8786 mL | 1.7573 mL | 4.3932 mL | |
| 20 mM | 0.1318 mL | 0.6590 mL | 1.3180 mL | 3.2949 mL | |
| 25 mM | 0.1054 mL | 0.5272 mL | 1.0544 mL | 2.6359 mL | |
| 30 mM | 0.0879 mL | 0.4393 mL | 0.8786 mL | 2.1966 mL | |
| 40 mM | 0.0659 mL | 0.3295 mL | 0.6590 mL | 1.6475 mL | |
| 50 mM | 0.0527 mL | 0.2636 mL | 0.5272 mL | 1.3180 mL | |
| 60 mM | 0.0439 mL | 0.2197 mL | 0.4393 mL | 1.0983 mL | |
| 80 mM | 0.0329 mL | 0.1647 mL | 0.3295 mL | 0.8237 mL | |
| 100 mM | 0.0264 mL | 0.1318 mL | 0.2636 mL | 0.6590 mL |
BI-78D3 Related Classifications
HY-10366 Related Classifications
Powered by Bioz