BMS-332
Based on 1 Customer Validation
BMS-332 is a dual DGKα/ζ lipid kinase inhibitor, with IC50s of 5 and 1 nM against DGKα and DGKζ, respectively. BMS-332 enhances the antigen-specific T cell response. BMS-332 reduces the viral load in the liver and spleen when combined with anti-PD-1 in chronic infection models. BMS-332 can be used for the study of T cell immune checkpoint strategy.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.05%
- No. CAS: 2407892-15-1
- Fòrmula: C29H27F2N5O
- Peso molecular:499.55
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Kinase Inhibitor Library
HY-L009
-
Metabolism/Protease Compound Library
HY-L012
-
Anti-Cancer Compound Library
HY-L025
-
Metabolic Enzyme Compound Library
HY-L146
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
Actividad biológica
0.005, 0.001 μM (DGKα,DGKζ)[1].
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| Sf9 | IC50 |
0.19 μM
Compound: Ex 3
|
Inhibition of full-length C-terminal His6 tagged TVMV-pFBgate fused human DGKalpha expressed in baculovirus infected Sf9 insect cells using liposome as substrate preincubated for 10 mins followed by compound addition and measured after 1 hr in presence of
Inhibition of full-length C-terminal His6 tagged TVMV-pFBgate fused human DGKalpha expressed in baculovirus infected Sf9 insect cells using liposome as substrate preincubated for 10 mins followed by compound addition and measured after 1 hr in presence of
|
[PMID: 32550982] |
| Sf9 | IC50 |
0.4 μM
Compound: Ex 3
|
Inhibition of full length C-terminal His6tagged TVMV-His-pFBgate fused human DGK-zeta expressed in baculovirus infected Sf9 insect cells using liposome as substrate preincubated for 10 mins followed by compound addition and measured after 1 hr in presence
Inhibition of full length C-terminal His6tagged TVMV-His-pFBgate fused human DGK-zeta expressed in baculovirus infected Sf9 insect cells using liposome as substrate preincubated for 10 mins followed by compound addition and measured after 1 hr in presence
|
[PMID: 32550982] |
BMS-332 enhances IFN-γ production from T cells (stimulated by peptide-pulsed HCT116 cells) by approximately twofold[1].
BMS-332 combined with αPD-1 induces a reduction (about 10-fold) in LCMV clone 13 titers in the liver and spleen[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 2407892-15-1
-
Appearance Solid
-
Peso molecular 499.55
-
Fòrmula C29H27F2N5O
-
Color White to light yellow
-
SMILES
CN(C1=CC=C(C#N)N=C1C(N2C[C@@H](C)N(C(C3=CC=C(F)C=C3)C4=CC=C(F)C=C4)C[C@@H]2C)=C5)C5=O
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
DMSO : 14.29 mg/mL (28.61 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.43 mg/mL (2.86 mM); Clear solution
This protocol yields a clear solution of ≥ 1.43 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (14.3 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (277 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0018 mL | 10.0090 mL | 20.0180 mL | 50.0450 mL |
| 5 mM | 0.4004 mL | 2.0018 mL | 4.0036 mL | 10.0090 mL | |
| 10 mM | 0.2002 mL | 1.0009 mL | 2.0018 mL | 5.0045 mL | |
| 15 mM | 0.1335 mL | 0.6673 mL | 1.3345 mL | 3.3363 mL | |
| 20 mM | 0.1001 mL | 0.5005 mL | 1.0009 mL | 2.5023 mL | |
| 25 mM | 0.0801 mL | 0.4004 mL | 0.8007 mL | 2.0018 mL |
Powered by Bioz