KUNG65
KUNG65 is a selective inhibitor of Grp94, with a target Kd of 540 nM and at least 73 fold selectivity vs. the other Hsp90 isoforms.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 98.84%
- No. CAS: 2144469-30-5
- Fòrmula: C23H20ClFO4
- Peso molecular:414.85
-
Almacenamiento:
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Actividad biológica
Chemical Information
-
No. CAS 2144469-30-5
-
Appearance Solid
-
Peso molecular 414.85
-
Fòrmula C23H20ClFO4
-
Color White to off-white
-
SMILES
ClC1=C(O)C=C(O)C(C(OC)=O)=C1CCC2=C(CC3=CC=C(F)C=C3)C=CC=C2
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Solvente y solubilidad
DMSO : ≥ 100 mg/mL (241.05 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.03 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (278 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4105 mL | 12.0525 mL | 24.1051 mL | 60.2627 mL |
| 5 mM | 0.4821 mL | 2.4105 mL | 4.8210 mL | 12.0525 mL | |
| 10 mM | 0.2411 mL | 1.2053 mL | 2.4105 mL | 6.0263 mL | |
| 15 mM | 0.1607 mL | 0.8035 mL | 1.6070 mL | 4.0175 mL | |
| 20 mM | 0.1205 mL | 0.6026 mL | 1.2053 mL | 3.0131 mL | |
| 25 mM | 0.0964 mL | 0.4821 mL | 0.9642 mL | 2.4105 mL | |
| 30 mM | 0.0804 mL | 0.4018 mL | 0.8035 mL | 2.0088 mL | |
| 40 mM | 0.0603 mL | 0.3013 mL | 0.6026 mL | 1.5066 mL | |
| 50 mM | 0.0482 mL | 0.2411 mL | 0.4821 mL | 1.2053 mL | |
| 60 mM | 0.0402 mL | 0.2009 mL | 0.4018 mL | 1.0044 mL | |
| 80 mM | 0.0301 mL | 0.1507 mL | 0.3013 mL | 0.7533 mL | |
| 100 mM | 0.0241 mL | 0.1205 mL | 0.2411 mL | 0.6026 mL |