M435-1279
Based on 1 Customer Validation
M435-1279 is a UBE2T inhibitor. M435-1279 inhibits the Wnt/β-catenin signaling pathway hyperactivation through blocking UBE2T-mediated degradation of RACK1.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza : 98.28%
- No. CAS: 1359431-16-5
- Fòrmula: C18H17N3O5S2
- Peso molecular:419.47
-
Almacenamiento:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
HY-126539
UBE2T/FANCL-IN-1Fanconi Anemi Pathway Inhibitor -
HY-120697
MSABWnt/β-Catenin Inhibitor -
HY-12238
IWR-1Wnt Signaling Inhibitor -
HY-15301
CC0651Cdc34 Inhibitor -
HY-141432
NX-1607Cbl-b Inhibitor -
HY-15531
VenetoclaxBCL-2 Inhibitor -
HY-17031
SBE-β-CDExcipient -
HY-111789
SubasumstatSUMOylation Inhibitor -
HY-N0077
Ginkgolic acidE1/E2/E3 Enzyme Inhibitor -
HY-13811
NSC697923UBE2N Inhibitor -
HY-19817
PRT4165E1/E2/E3 Enzyme Inhibitor -
HY-101836
DKM 2-93UBA5 Inhibitor
Actividad biológica
Descripciòn
IC50 & Target
|
UBE2T |
In Vitro
M435-1279 (0-31 μM; 48 h) significantly inhibits the growth of HGC27, AGS, and MKN45 cells[1].
M435-1279 (0, 4, 8, 12, 16, 20 μM) inhibits the cell viability with IC50s of 16.8, 11.88, 6.93, 7.76 μM of GES-1, HGC27, MKN45, AGS cells, respectively[1].
M435-1279 (31 nM to 500 μM) binds to UBE2T with a KD value of 50.5 μM[1].
M435-1279 (11.88 μM; 48 h) inhibits the ubiquitination of RACK1 and the hyperactivation of the Wnt/β-catenin pathway[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
-
Cell Line:HGC27, AGS, and MKN45 cells
-
Concentration:0, 2, 4, 8, 16, 31 μM
-
Incubation Time:48 h
-
Result:Inhibited the cell growth.
-
Cell Line:HGC27, AGS, and MKN45 cells
-
Concentration:0, 4, 8, 12, 16, 20 μM
-
Incubation Time:
-
Result:Inhibited the cell viability with IC50s of 16.8, 11.88, 6.93, 7.76 μM in GES-1, HGC27, MKN45, AGS cells, respectively.
In Vivo
M435-1279 induces higher RACK1 proteins expression, and lower Ki-67 and β-catenin proteins expression in intratumor tumors[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:BALB/C nude mice CDX model (MKN45 tumor size: 75–100 mm3)[1]
-
Dosage:5 mg/kg/day
-
Administration:Intratumor injection for 18 days
-
Result:Slowed the tumor growth.
Induced higher RACK1 proteins expression, and lower Ki-67 and β-catenin proteins expression in intratumor tumors.
Chemical Information
-
No. CAS 1359431-16-5
-
Appearance Solid
-
Peso molecular 419.47
-
Fòrmula C18H17N3O5S2
-
Color White to off-white
-
SMILES
O=C(C1=C(O)C2=C(SC3=C2CCCC3)NC1=O)NC4=CC=C(S(=O)(N)=O)C=C4
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvente y solubilidad
In Vitro:
DMSO : 50 mg/mL (119.20 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.96 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (291 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Yu Z, et al. A novel UBE2T inhibitor suppresses Wnt/β-catenin signaling hyperactivation and gastric cancer progression by blocking RACK1 ubiquitination. Oncogene. 2021 Feb;40(5):1027-1042. doi: 10.1038/s41388-020-01572-w. Epub 2020 Dec 15. Erratum in: Oncogene. 2021 Apr;40(14):2622-2623. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3840 mL | 11.9198 mL | 23.8396 mL | 59.5990 mL |
| 5 mM | 0.4768 mL | 2.3840 mL | 4.7679 mL | 11.9198 mL | |
| 10 mM | 0.2384 mL | 1.1920 mL | 2.3840 mL | 5.9599 mL | |
| 15 mM | 0.1589 mL | 0.7947 mL | 1.5893 mL | 3.9733 mL | |
| 20 mM | 0.1192 mL | 0.5960 mL | 1.1920 mL | 2.9800 mL | |
| 25 mM | 0.0954 mL | 0.4768 mL | 0.9536 mL | 2.3840 mL | |
| 30 mM | 0.0795 mL | 0.3973 mL | 0.7947 mL | 1.9866 mL | |
| 40 mM | 0.0596 mL | 0.2980 mL | 0.5960 mL | 1.4900 mL | |
| 50 mM | 0.0477 mL | 0.2384 mL | 0.4768 mL | 1.1920 mL | |
| 60 mM | 0.0397 mL | 0.1987 mL | 0.3973 mL | 0.9933 mL | |
| 80 mM | 0.0298 mL | 0.1490 mL | 0.2980 mL | 0.7450 mL | |
| 100 mM | 0.0238 mL | 0.1192 mL | 0.2384 mL | 0.5960 mL |
M435-1279 Related Classifications
HY-141891 Related Classifications
Powered by Bioz