Mal-PEG6-NHS ester
Based on 1 Customer Validation
Mal-PEG6-NHS ester is a nonclaevable ADC linker containing a Maleimide group, 6-unit PEG and a NHS ester.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 98.0%
- No. CAS: 1599472-25-9
- Fòrmula: C23H34N2O12
- Peso molecular:530.52
-
Almacenamiento:
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Ver todos los productos específicos de isoformas ADC Linkers
More
Actividad biológica
|
Non-cleavable Linker |
ADCs are comprised of an antibody to which is attached an ADC cytotoxin through an ADC linker.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 1599472-25-9
-
Appearance Liquid (Density: 1.32±0.1 g/cm3)
-
Peso molecular 530.52
-
Fòrmula C23H34N2O12
-
Color Colorless to light yellow
-
SMILES
O=C(ON1C(CCC1=O)=O)CCOCCOCCOCCOCCOCCOCCN2C(C=CC2=O)=O
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvente y solubilidad
DMSO : 100 mg/mL (188.49 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.71 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.71 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (267 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8849 mL | 9.4247 mL | 18.8494 mL | 47.1236 mL |
| 5 mM | 0.3770 mL | 1.8849 mL | 3.7699 mL | 9.4247 mL | |
| 10 mM | 0.1885 mL | 0.9425 mL | 1.8849 mL | 4.7124 mL | |
| 15 mM | 0.1257 mL | 0.6283 mL | 1.2566 mL | 3.1416 mL | |
| 20 mM | 0.0942 mL | 0.4712 mL | 0.9425 mL | 2.3562 mL | |
| 25 mM | 0.0754 mL | 0.3770 mL | 0.7540 mL | 1.8849 mL | |
| 30 mM | 0.0628 mL | 0.3142 mL | 0.6283 mL | 1.5708 mL | |
| 40 mM | 0.0471 mL | 0.2356 mL | 0.4712 mL | 1.1781 mL | |
| 50 mM | 0.0377 mL | 0.1885 mL | 0.3770 mL | 0.9425 mL | |
| 60 mM | 0.0314 mL | 0.1571 mL | 0.3142 mL | 0.7854 mL | |
| 80 mM | 0.0236 mL | 0.1178 mL | 0.2356 mL | 0.5890 mL | |
| 100 mM | 0.0188 mL | 0.0942 mL | 0.1885 mL | 0.4712 mL |
Powered by Bioz