Stampidine
Based on 1 Customer Validation
Stampidine is a nucleoside reverse transcriptase inhibitor (NRTI) with potent and broad-spectrum anti-HIV activity. Stampidine inhibits the laboratory HIV-1 strain HTLVIIIB (B-envelope subtype) and primary clinical isolates with IC50s of 1 nM and 2 nM, respectively. Stampidine also inhibits NRTI-resistant primary clinical isolates and NNRTI-resistant clinical isolates with IC50s of 8.7 nM and 11.2 nM, respectively.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.96%
- No. CAS: 217178-62-6
- Fòrmula: C20H23BrN3O8P
- Peso molecular:544.29
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
Descripciòn
IC50 & Target
|
HIV-1 |
In Vitro
In Vivo
Stampidine (100 mg/kg; p.o.) shows the average plasma Cmax, AUC, half-life (t1/2), and mean residence time (MRT) values of 15.4 μM, 23.1 μM h, 108.6 min and 119.4 min, respectively, in dogs[4].
Stampidine does not cause anemia, thrombocytopenia, neutropenia, or lymphopenia suggestive of hematologic toxicity, elevations of BUN or creatinine or electrolyte disturbances suggestive of renal toxicity or metabolic abnormalities, elevations of ALT, AST, Alk in adult beagle dogs[4].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:SPF male or female domestic cats (2.9- 6.2 kg), with chronically FIV-infected[3]
-
Dosage:50 mg/kg, 100 mg/kg
-
Administration:Oral administration (oral bolus dose)
-
Result:Exhibited potent antiretroviral activity.
-
Animal Model:Male beagle dogs (10-12 kg)[4]
-
Dosage:100 mg/kg (Pharmacokinetic Analysis)
-
Administration:Oral administration
-
Result:The estimated average plasma Cmax and AUC values were 15.4 µM and 23.1 µM·h, respectively. The average elimination half-life (t1/2) and mean residence time (MRT) were 108.6 min and 119.4 min, respectively.
Chemical Information
-
No. CAS 217178-62-6
-
Appearance Solid
-
Peso molecular 544.29
-
Fòrmula C20H23BrN3O8P
-
Color White to off-white
-
SMILES
O=C(NC1=O)N(C=C1C)[C@](C=C2)([H])O[C@@H]2CO[P](OC(C=C3)=CC=C3Br)(N[C@@H](C)C(OC)=O)=O
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
In Vitro:
DMSO : 100 mg/mL (183.73 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 0.83 mg/mL (1.52 mM); Clear solution
This protocol yields a clear solution of ≥ 0.83 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (8.3 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 0.83 mg/mL (1.52 mM); Clear solution
This protocol yields a clear solution of ≥ 0.83 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (8.3 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (280 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Osmond J D'Cruz, et al. Stampidine: a selective oculo-genital microbicide. J Antimicrob Chemother. 2005 Jul;56(1):10-9. [Content Brief]
[2]. Osmond J D'Cruz, et al. Stampidine is a potential nonspermicidal broad-spectrum anti-human immunodeficiency virus microbicide. Fertil Steril. 2004 Mar;81 Suppl 1:831-41. [Content Brief]
[3]. Fatih M Uckun, et al. In Vivo Antiretroviral Activity of Stampidine in Chronically Feline Immunodeficiency Virus-Infected Cats. Antimicrob Agents Chemother. 2003 Apr;47(4):1233-40. [Content Brief]
[4]. Fatih M Uckun, et al. In Vivo Pharmacokinetics and Toxicity Profile of the anti-HIV Agent Stampidine in Dogs and Feline Immunodeficiency Virus-Infected Cats. Arzneimittelforschung. 2006 Feb;56(2A):176-92. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8373 mL | 9.1863 mL | 18.3726 mL | 45.9314 mL |
| 5 mM | 0.3675 mL | 1.8373 mL | 3.6745 mL | 9.1863 mL | |
| 10 mM | 0.1837 mL | 0.9186 mL | 1.8373 mL | 4.5931 mL | |
| 15 mM | 0.1225 mL | 0.6124 mL | 1.2248 mL | 3.0621 mL | |
| 20 mM | 0.0919 mL | 0.4593 mL | 0.9186 mL | 2.2966 mL | |
| 25 mM | 0.0735 mL | 0.3675 mL | 0.7349 mL | 1.8373 mL | |
| 30 mM | 0.0612 mL | 0.3062 mL | 0.6124 mL | 1.5310 mL | |
| 40 mM | 0.0459 mL | 0.2297 mL | 0.4593 mL | 1.1483 mL | |
| 50 mM | 0.0367 mL | 0.1837 mL | 0.3675 mL | 0.9186 mL | |
| 60 mM | 0.0306 mL | 0.1531 mL | 0.3062 mL | 0.7655 mL | |
| 80 mM | 0.0230 mL | 0.1148 mL | 0.2297 mL | 0.5741 mL | |
| 100 mM | 0.0184 mL | 0.0919 mL | 0.1837 mL | 0.4593 mL |
Stampidine Related Classifications
HY-122470 Related Classifications
Powered by Bioz