HIF1 agonist-1
Based on 1 Customer Validation
HIF1 agonist-1 (compound F4) is a potent HIF1 agonist with an EC50 value of 0.9 μM. HIF1 agonist-1 can be used for researching anticancer.
For research use only. We do not sell to patients.
- Purity: 99.11%
- CAS No.: 333314-79-7
- Formula: C26H24N2O3
- Molecular Weight:412.48
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Biological Activity
EC50: 0.9 μM (HIF1)[1]
Chemical Information
-
CAS No. 333314-79-7
-
Appearance Solid
-
Molecular Weight 412.48
-
Formula C26H24N2O3
-
Color Light yellow to yellow
-
SMILES
O=C(CCC1=CC=CC=C1)NC(C2=C(O)C3=NC=CC=C3C=C2)C4=CC=C(C=C4)OC
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : 125 mg/mL (303.04 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.04 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4244 mL | 12.1218 mL | 24.2436 mL | 60.6090 mL |
| 5 mM | 0.4849 mL | 2.4244 mL | 4.8487 mL | 12.1218 mL | |
| 10 mM | 0.2424 mL | 1.2122 mL | 2.4244 mL | 6.0609 mL | |
| 15 mM | 0.1616 mL | 0.8081 mL | 1.6162 mL | 4.0406 mL | |
| 20 mM | 0.1212 mL | 0.6061 mL | 1.2122 mL | 3.0304 mL | |
| 25 mM | 0.0970 mL | 0.4849 mL | 0.9697 mL | 2.4244 mL | |
| 30 mM | 0.0808 mL | 0.4041 mL | 0.8081 mL | 2.0203 mL | |
| 40 mM | 0.0606 mL | 0.3030 mL | 0.6061 mL | 1.5152 mL | |
| 50 mM | 0.0485 mL | 0.2424 mL | 0.4849 mL | 1.2122 mL | |
| 60 mM | 0.0404 mL | 0.2020 mL | 0.4041 mL | 1.0101 mL | |
| 80 mM | 0.0303 mL | 0.1515 mL | 0.3030 mL | 0.7576 mL | |
| 100 mM | 0.0242 mL | 0.1212 mL | 0.2424 mL | 0.6061 mL |