AGI-6780
Based on 9 publication(s) in Google Scholar
AGI-6780 that potently and selectively inhibits the tumor-associated mutant IDH2R140Q with IC50 of 23±1.7 nM. AGI-6780 is less potent against IDH2WT with IC50 of 190±8.1 nM.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.26%
- CAS 番号: 1432660-47-3
- 分子式: C21H18F3N3O3S2
- 分子量:481.51
-
保管条件:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
MedChemExpress(MCE)の使用を引用している文献 AGI-6780
More- Cell Metab. 2020 Dec 8;S1550-4131(20)30655-0. [Abstract]
- Cell Commun Signal. 2020 Apr 3;18(1):55. [Abstract]
- Clin Cancer Res. 2018 Apr 1;24(7):1705-1715. [Abstract]
- Br J Pharmacol. 2024 Oct;181(20):4067-4084. [Abstract]
- J Med Chem. 2023 Apr 13;66(7):5279-5288. [Abstract]
- Int Immunopharmacol. 2024 Aug 1:140:112828. [Abstract]
- Oncol Rep. 2018 Aug;40(2):635-646. [Abstract]
- bioRxiv. April 09, 2021.
- Methods Mol Biol. 2018:1711:351-398. [Abstract]
生物活性
|
IDH2 |
AGI-6780 is tested in both human glioblastoma U87 and TF-1 cells expressing IDH2R140Q, as well as against IDH1R132H for 48 h incubation, with IC50 of 11±2.6 nM, 18±0.51 nM, and >1 mM, respectivly.Treatment of TF-1R140Q cells with AGI-6780, at concentrations that lower 2HG to near-normal physiologic levels, restore expression of both HBG and KLF1 genes and the color change associated with differentiation. AGI-6780 can reverse the IDH2R140Q-induced differentiation block in TF-1 cells. Pretreatment with AGI-6780 (0.2 μM and 1 μM) markedly decreased the intracellular concentration of (R)-2-hydroxyglutarate in the TF1R140Q cells and restored their ability to undergo EPO-induced differentiation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
化学情報
-
CAS 番号 1432660-47-3
-
性状 Solid
-
分子量 481.51
-
分子式 C21H18F3N3O3S2
-
Color White to off-white
-
SMILES
O=S(C1=CC=C(C2=CSC=C2)C(NC(NC3=CC=CC(C(F)(F)F)=C3)=O)=C1)(NC4CC4)=O
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (9)
-
Journal Impact Factor
-
Most Recent
-
Cell Metab
Reductive TCA cycle metabolism fuels glutamine- and glucose-stimulated insulin secretion. [Abstract]2020 Dec 8;S1550-4131(20)30655-0. PMID: 33321098 -
Cell Commun Signal
Identification of a selective inhibitor of IDH2/R140Q enzyme that induces cellular differentiation in leukemia cells. [Abstract]2020 Apr 3;18(1):55. PMID: 32245484 -
Clin Cancer Res
IDH1/2 Mutations Sensitize Acute Myeloid Leukemia to PARP Inhibition and This Is Reversed by IDH1/2-Mutant Inhibitors. [Abstract]2018 Apr 1;24(7):1705-1715. PMID: 29339439 -
Br J Pharmacol
IDH2-NADPH pathway protects against acute pancreatitis via suppressing acinar cell ferroptosis. [Abstract]2024 Oct;181(20):4067-4084. PMID: 39072736 -
J Med Chem
Differentiating Inhibition Selectivity and Binding Affinity of Isocitrate Dehydrogenase 1 Variant Inhibitors. [Abstract]2023 Apr 13;66(7):5279-5288. PMID: 36952395 -
Int Immunopharmacol
Isocitrate dehydrogenases 2-mediated dysfunctional metabolic reprogramming promotes intestinal cancer progression via regulating HIF-1A signaling pathway. [Abstract]2024 Aug 1:140:112828. PMID: 39094359 -
Oncol Rep
Evaluation of anticancer agents using patient-derived tumor organoids characteristically similar to source tissues. [Abstract]2018 Aug;40(2):635-646. PMID: 29917168 -
-
Methods Mol Biol
2018:1711:351-398. PMID: 29344898
溶剤 & 溶解度
DMSO : 100 mg/mL (207.68 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.19 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 50% PEG300 50% Saline
Solubility: 5 mg/mL (10.38 mM); Suspended solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
プロトコル
AGI-6780 is prepared as 10 mM stock in DMSO and diluted to 50X final concentration in DMSO, for a 50 μL reaction mixture. IDH enzyme activity converting alpha-ketoglutarate to 2-hydroxyglutarate is measured using a NADPH depletion assay. In the assay the remaining cofactor is measured at the end of the reaction with the addition of a catalytic excess of diaphorase and resazurin, to generate a fluorescent signal in proportion to the amount of NADPH remaining. IDH enzyme activity in the direction of isocitrate to alpha-ketoglutarate conversion is measured by direct coupling of the NADPH production to conversion of resazurin to resorufin by diaphorase. In both cases, resorufin is measured fluorometrically at Ex544 Em590[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Cells are sorted from fresh or frozen bone marrow aspirates and blood samples after labelling with PE-CD34, APC-CD38, PE-CD14, FITC-CD3 (clone HIT3a) and PECy7-CD19 (clone SJ25C1) antibodies using a MoFlow cell sorter. Unfractionated nucleated blood or bone marrow cells are plated in Methocult H4434 methylcellulose medium at 104 cells/dish, in duplicate dishes per condition. AGI-6780 (5 mM) is directly added to the medium. Dishes are incubated in a humidified incubator at 37°C and colonies containing at least 30 cells are counted after 13 days[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
純度とドキュメンテーション
-
データシート (282 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0768 mL | 10.3840 mL | 20.7680 mL | 51.9200 mL |
| 5 mM | 0.4154 mL | 2.0768 mL | 4.1536 mL | 10.3840 mL | |
| 10 mM | 0.2077 mL | 1.0384 mL | 2.0768 mL | 5.1920 mL | |
| 15 mM | 0.1385 mL | 0.6923 mL | 1.3845 mL | 3.4613 mL | |
| 20 mM | 0.1038 mL | 0.5192 mL | 1.0384 mL | 2.5960 mL | |
| 25 mM | 0.0831 mL | 0.4154 mL | 0.8307 mL | 2.0768 mL | |
| 30 mM | 0.0692 mL | 0.3461 mL | 0.6923 mL | 1.7307 mL | |
| 40 mM | 0.0519 mL | 0.2596 mL | 0.5192 mL | 1.2980 mL | |
| 50 mM | 0.0415 mL | 0.2077 mL | 0.4154 mL | 1.0384 mL | |
| 60 mM | 0.0346 mL | 0.1731 mL | 0.3461 mL | 0.8653 mL | |
| 80 mM | 0.0260 mL | 0.1298 mL | 0.2596 mL | 0.6490 mL | |
| 100 mM | 0.0208 mL | 0.1038 mL | 0.2077 mL | 0.5192 mL |