BCAT-IN-1
Based on 1 Customer Validation
BCAT-IN-1 is a potent, selective and orally active inhibitor of BCATm, with a pIC50 of 7.3. BCAT-IN-1 shows 100-fold selectivity for BCATm over BCATc (pIC50=5.4). BCAT-IN-1 can be used for the research of metabolic diseases.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 98.06%
- CAS 番号: 1875078-61-7
- 分子式: C25H24BrN5O2S
- 分子量:538.46
-
保管条件:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
生物活性
pIC50: 7.3 (BCATm)[1]
BCAT-IN-1 (5 mg/kg; p.o.) exhibits oral bioavailability (F=28%) and Cmax (1648 ng/mL) in mice[1].
BCAT-IN-1 (1 mg/kg; i.v.) exhibits half-life (t1/2=9.2 h) and clearance (Cl=4.0 mL/min/kg) in mice[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
化学情報
-
CAS 番号 1875078-61-7
-
性状 Solid
-
分子量 538.46
-
分子式 C25H24BrN5O2S
-
Color White to light yellow
-
SMILES
O=C(C1=CC=C2N([C@H]3C[C@@H](NC(C4=CC=C(Br)S4)=O)CCC3)C(C5=NC=CC=C5)=NC2=C1)NC
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
溶剤 & 溶解度
DMSO : 100 mg/mL (185.71 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.64 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8571 mL | 9.2857 mL | 18.5715 mL | 46.4287 mL |
| 5 mM | 0.3714 mL | 1.8571 mL | 3.7143 mL | 9.2857 mL | |
| 10 mM | 0.1857 mL | 0.9286 mL | 1.8571 mL | 4.6429 mL | |
| 15 mM | 0.1238 mL | 0.6190 mL | 1.2381 mL | 3.0952 mL | |
| 20 mM | 0.0929 mL | 0.4643 mL | 0.9286 mL | 2.3214 mL | |
| 25 mM | 0.0743 mL | 0.3714 mL | 0.7429 mL | 1.8571 mL | |
| 30 mM | 0.0619 mL | 0.3095 mL | 0.6190 mL | 1.5476 mL | |
| 40 mM | 0.0464 mL | 0.2321 mL | 0.4643 mL | 1.1607 mL | |
| 50 mM | 0.0371 mL | 0.1857 mL | 0.3714 mL | 0.9286 mL | |
| 60 mM | 0.0310 mL | 0.1548 mL | 0.3095 mL | 0.7738 mL | |
| 80 mM | 0.0232 mL | 0.1161 mL | 0.2321 mL | 0.5804 mL | |
| 100 mM | 0.0186 mL | 0.0929 mL | 0.1857 mL | 0.4643 mL |