Ladarixin
Based on 1 publication(s) in Google Scholar
Ladarixin (DF 2156A free base) is an orally active, allosteric non-competitive and dual CXCR1 and CXCR2 antagonist. Ladarixin can be used for the research of COPD and asthma.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.95%
- CAS 番号: 849776-05-2
- 分子式: C11H12F3NO6S2
- 分子量:375.34
-
保管条件:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
MedChemExpress(MCE)の使用を引用している文献 Ladarixin
More
生物活性
Ladarixin inhibits human polymorphonuclear leukocyte (PMN) migration to CXCL8 (IC50 at 0.7 nM)[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
? Ladarixin (10 mg/kg; p.o. once a day for 8 days) reduces pulmonary inflammation and fibrosis induced by bleomycin in mice[1].
? Ladarixin (10 mg/kg; p.o. once a day for 3 days) protects mice from cigarette smoke-induced exacerbation of influenza-A infection[1].
? Ladarixin is also effective in decreasing CXCL8-induced polymorphonuclear leukocyte infiltration in several animal models without a significant dose-related reduction in systemic neutrophil counts[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Mice (cigarette smoke-induced exacerbation of Influenza-A infection model)[1]
-
Dosage:10 mg/kg
-
Administration:P.o. once a day at days 2, 3 and 4 post-infection
-
Result:Significantly attenuated the exacerbation in lethality and respiratory changes noted in CSFlu group.
化学情報
-
CAS 番号 849776-05-2
-
性状 Solid
-
分子量 375.34
-
分子式 C11H12F3NO6S2
-
Color White to off-white
-
SMILES
O=S(C(F)(F)F)(OC1=CC=C([C@@H](C)C(NS(=O)(C)=O)=O)C=C1)=O
-
別名
DF 2156A free base
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
J Exp Clin Cancer Res
Unveiling CXCR2 as a promising therapeutic target in renal cell carcinoma: exploring the immunotherapeutic paradigm shift through its inhibition by RCT001. [Abstract]2024 Mar 19;43(1):86. PMID: 38504270
溶剤 & 溶解度
DMSO : 100 mg/mL (266.43 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.66 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.66 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 50% PEG300 50% Saline
Solubility: 10 mg/mL (26.64 mM); Suspended solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (275 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
取扱説明書 (2659 KB)
参考文献
[1]. Matheus Silverio Mattos, et al. CXCR1 and CXCR2 Inhibition by Ladarixin Improves Neutrophil-Dependent Airway Inflammation in Mice. Front Immunol. 2020 Oct 2;11:566953. [Content Brief]
[2]. Daria Marley Kemp, et al. Ladarixin, a dual CXCR1/2 inhibitor, attenuates experimental melanomas harboring different molecular defects by affecting malignant cells and tumor microenvironment. Oncotarget. 2017 Feb 28;8(9):14428-14442 [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6643 mL | 13.3213 mL | 26.6425 mL | 66.6063 mL |
| 5 mM | 0.5329 mL | 2.6643 mL | 5.3285 mL | 13.3213 mL | |
| 10 mM | 0.2664 mL | 1.3321 mL | 2.6643 mL | 6.6606 mL | |
| 15 mM | 0.1776 mL | 0.8881 mL | 1.7762 mL | 4.4404 mL | |
| 20 mM | 0.1332 mL | 0.6661 mL | 1.3321 mL | 3.3303 mL | |
| 25 mM | 0.1066 mL | 0.5329 mL | 1.0657 mL | 2.6643 mL | |
| 30 mM | 0.0888 mL | 0.4440 mL | 0.8881 mL | 2.2202 mL | |
| 40 mM | 0.0666 mL | 0.3330 mL | 0.6661 mL | 1.6652 mL | |
| 50 mM | 0.0533 mL | 0.2664 mL | 0.5329 mL | 1.3321 mL | |
| 60 mM | 0.0444 mL | 0.2220 mL | 0.4440 mL | 1.1101 mL | |
| 80 mM | 0.0333 mL | 0.1665 mL | 0.3330 mL | 0.8326 mL | |
| 100 mM | 0.0266 mL | 0.1332 mL | 0.2664 mL | 0.6661 mL |