DL-01 formic
Based on 1 Customer Validation
DL-01 formic is a drug-linker conjugates for ADC that can be used for the synthesis of ADCs.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 98.46%
- CAS No.: 2964513-44-6
- 화학식: C56H73N9O15S
- 분자량:1144.30
-
보관:
-80°C, protect from light, stored under nitrogen
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
All Drug-Linker Conjugates for ADC Isoforms
More
Biological Activity
ADCs are comprised of an antibody to which is attached an ADC cytotoxin through an ADC linker.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2964513-44-6
-
Appearance Solid
-
분자량 1144.30
-
화학식 C56H73N9O15S
-
Color White to light yellow
-
SMILES
CS(C1=NC=C(C=N1)C#CCCCC(N[C@@H](C(C)C)C(N[C@@H](CCCCN(CCC)CCC)C(NCC(NCOCCCC2=C3C(C(N4C3)=CC([C@](O)(C(OC5)=O)CC)=C5C4=O)=NC6=CC(OCO7)=C7C=C62)=O)=O)=O)=O)(=O)=O.OC=O
-
선적
Shipping with dry ice.
-
보관
-80°C, protect from light, stored under nitrogen
용액&용해도
DMSO : ≥ 100 mg/mL (87.39 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (2.18 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (2.18 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.8739 mL | 4.3695 mL | 8.7390 mL | 21.8474 mL |
| 5 mM | 0.1748 mL | 0.8739 mL | 1.7478 mL | 4.3695 mL | |
| 10 mM | 0.0874 mL | 0.4369 mL | 0.8739 mL | 2.1847 mL | |
| 15 mM | 0.0583 mL | 0.2913 mL | 0.5826 mL | 1.4565 mL | |
| 20 mM | 0.0437 mL | 0.2185 mL | 0.4369 mL | 1.0924 mL | |
| 25 mM | 0.0350 mL | 0.1748 mL | 0.3496 mL | 0.8739 mL | |
| 30 mM | 0.0291 mL | 0.1456 mL | 0.2913 mL | 0.7282 mL | |
| 40 mM | 0.0218 mL | 0.1092 mL | 0.2185 mL | 0.5462 mL | |
| 50 mM | 0.0175 mL | 0.0874 mL | 0.1748 mL | 0.4369 mL | |
| 60 mM | 0.0146 mL | 0.0728 mL | 0.1456 mL | 0.3641 mL | |
| 80 mM | 0.0109 mL | 0.0546 mL | 0.1092 mL | 0.2731 mL |
DL-01 formic Related Classifications
HY-155870A Related Classifications
Powered by Bioz