DNP-PEG4-NHS ester
Based on 2 publication(s) in Google Scholar
DNP-PEG4-NHS ester is a PEG-based PROTAC linker that can be used in the synthesis of PROTACs.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 96.81%
- CAS No.: 858126-78-0
- 화학식: C21H28N4O12
- 분자량:528.47
-
보관:
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) DNP-PEG4-NHS ester
MoreAll PROTAC Linkers Isoforms
More
Biological Activity
|
PEGs |
PROTACs contain two different ligands connected by a linker; one is a ligand for an E3 ubiquitin ligase and the other is for the target protein. PROTACs exploit the intracellular ubiquitin-proteasome system to selectively degrade target proteins[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 858126-78-0
-
Appearance Viscous Liquid
-
분자량 528.47
-
화학식 C21H28N4O12
-
Color Light yellow to yellow
-
SMILES
O=C(CC1)N(OC(CCOCCOCCOCCOCCNC2=CC=C([N+]([O-])=O)C=C2[N+]([O-])=O)=O)C1=O
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
J Am Chem Soc
Hijacking Extracellular Targeted Protein Degrader-Drug Conjugates for Enhanced Drug Delivery. [Abstract]2025 Oct 29;147(43):39912-39925. PMID: 41091621 -
bioRxiv
Low-density lipoprotein receptor-targeting chimeras for membrane protein degradation and enhanced drug delivery. [Abstract]2025 Jun 9:2025.06.06.658366. PMID: 40661577
용액&용해도
DMSO : ≥ 100 mg/mL (189.23 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.73 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.73 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (269 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8923 mL | 9.4613 mL | 18.9226 mL | 47.3064 mL |
| 5 mM | 0.3785 mL | 1.8923 mL | 3.7845 mL | 9.4613 mL | |
| 10 mM | 0.1892 mL | 0.9461 mL | 1.8923 mL | 4.7306 mL | |
| 15 mM | 0.1262 mL | 0.6308 mL | 1.2615 mL | 3.1538 mL | |
| 20 mM | 0.0946 mL | 0.4731 mL | 0.9461 mL | 2.3653 mL | |
| 25 mM | 0.0757 mL | 0.3785 mL | 0.7569 mL | 1.8923 mL | |
| 30 mM | 0.0631 mL | 0.3154 mL | 0.6308 mL | 1.5769 mL | |
| 40 mM | 0.0473 mL | 0.2365 mL | 0.4731 mL | 1.1827 mL | |
| 50 mM | 0.0378 mL | 0.1892 mL | 0.3785 mL | 0.9461 mL | |
| 60 mM | 0.0315 mL | 0.1577 mL | 0.3154 mL | 0.7884 mL | |
| 80 mM | 0.0237 mL | 0.1183 mL | 0.2365 mL | 0.5913 mL | |
| 100 mM | 0.0189 mL | 0.0946 mL | 0.1892 mL | 0.4731 mL |
DNP-PEG4-NHS ester Related Classifications
HY-140614 Related Classifications
Powered by Bioz