PTGR2-IN-1
Based on 1 Customer Validation
PTGR2-IN-1 is a potent PTGR2 inhibitor with an IC50 of ~0.7 μM. PTGR2-IN-1 increases 15-keto-PGE2-dependent PPARγ transcriptional activity in PTGR2-transfected HEK293T cells.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 99.82%
- CAS No.: 349093-44-3
- 화학식: C19H22N2O2
- 분자량:310.39
-
보관:Pure form -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- Protocol
- 순도&문서
- References
-
Help & FAQs
-
HY-17386
RosiglitazonePPARγ Agonist -
HY-15721
FH535Wnt/β-catenin/PPAR Inhibitor -
HY-50935
TroglitazonePPARγ Agonist -
HY-17386R
Rosiglitazone (Standard)PPARγ Agonist -
HY-17386A
Rosiglitazone hydrochloridePPARγ Agonist -
HY-50935R
Troglitazone (Standard)PPARγ Agonist -
HY-17386AR
Rosiglitazone hydrochloride (Standard)PPARγ Agonist
Biological Activity
제품 설명
In Vitro
A screen of structural analogs of 20 identified PTGR2-IN-1, which shows substantially increased potency (>20-fold) in assays measuring either competition of 8-labeling or 15-keto-PGE2 reductase activity (IC50 = 0.6 μM) of recombinant PTGR2, as well as an inactive control compound 23. PTGR2-IN-1 (Compound 22) blocks FFF 8 labeling of endogenous PTGR2 in HEK293T cells with good potency (complete inhibition at 5 μM and ~80% inhibition at 500 nM) and excellent selectivity[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 349093-44-3
-
Appearance Oil
-
분자량 310.39
-
화학식 C19H22N2O2
-
Color White to off-white
-
SMILES
COC1=CC=CC=C1N2CCN(C(CC3=CC=CC=C3)=O)CC2
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Pure form -20°C 3 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
In Vitro:
DMSO : 100 mg/mL (322.18 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.05 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.05 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2218 mL | 16.1088 mL | 32.2175 mL | 80.5438 mL |
| 5 mM | 0.6444 mL | 3.2218 mL | 6.4435 mL | 16.1088 mL | |
| 10 mM | 0.3222 mL | 1.6109 mL | 3.2218 mL | 8.0544 mL | |
| 15 mM | 0.2148 mL | 1.0739 mL | 2.1478 mL | 5.3696 mL | |
| 20 mM | 0.1611 mL | 0.8054 mL | 1.6109 mL | 4.0272 mL | |
| 25 mM | 0.1289 mL | 0.6444 mL | 1.2887 mL | 3.2218 mL | |
| 30 mM | 0.1074 mL | 0.5370 mL | 1.0739 mL | 2.6848 mL | |
| 40 mM | 0.0805 mL | 0.4027 mL | 0.8054 mL | 2.0136 mL | |
| 50 mM | 0.0644 mL | 0.3222 mL | 0.6444 mL | 1.6109 mL | |
| 60 mM | 0.0537 mL | 0.2685 mL | 0.5370 mL | 1.3424 mL | |
| 80 mM | 0.0403 mL | 0.2014 mL | 0.4027 mL | 1.0068 mL | |
| 100 mM | 0.0322 mL | 0.1611 mL | 0.3222 mL | 0.8054 mL |
PTGR2-IN-1 Related Classifications
HY-122716 Related Classifications
Powered by Bioz