(-)-Cedrene
Based on 2 publication(s) in Google Scholar
(-)-Cedrene (α-cedrene) is a major constituent that can be found in essential oils. (-)-Cedrene (α-cedrene) is a natural, orally active ligand of mouse olfactory receptor 23, which induces skeletal muscle hypertrophy in mice. (-)-Cedrene exhibits trypanocidal (Trypanosoma b. brucei) (IC50 = 4.07 μg/mL). (-)-Cedrene is antileukemic in vitro (IC50 = 22.2 μg/mL). (-)-Cedrene has antimicrobial activity against anaerobic bacteria and yeast. (-)-Cedrene exhibits anti-obesity activity.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.0%
- CAS No.: 469-61-4
- Formule: C15H24
- Masse moléculaire:204.35
-
Stockage:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) (-)-Cedrene
More
Activité biologique
(-)-Cedrene (Compound α-cedrene) (100 μM, 72 h) results in a distinct increase in myotubes diameter, fusion index, and cellular protein context of C2C12 myoblast[2].
(-)-Cedrene (100 μM, 24 h) significantly attenuates the palmitic acid (HY-N0830)-induced intramyocellular lipid accumulation in C2C12 myotubes[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:C2C12 myoblast
-
Concentration:100 μM
-
Incubation Time:24 h
-
Result:Resulted in a decrease in lipid droplet accumulation and in mRNA expression of white adipocyte-specific marker genes.
Increased myotube diameter, fusion index, and mRNA levels of myogenic marker genes.
(-)-Cedrene (50 mg/kg, p.o., single dose) has notably higher distribution to lipid than to other tissues in rats[1].
(-)-Cedrene (200 mg/kg/day, p.o., 10 w) significantly increases grip strength and skeletal muscle weight without altering the body weight of mice[1].
(-)-Cedrene (200 mg/kg/day, i.g., 10 w) attenuates skeletal muscle atrophy induced by HFD in mice[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male C57BL/6N mice (5 weeks)[1]
-
Dosage:200 mg/kg/day
-
Administration:Intragastric gavage (i.g.) for 10 weeks
-
Result:Significantly decreased the adipogenic differentiation induced by HFD in skeletal muscle tissue.
Significantly attenuated the lipid accumulation in skeletal muscle increased by HFD.
Strongly upregulated the expression of MOR23 and Adcy3 and increased cAMP concentration.
Chemical Information
-
CAS No. 469-61-4
-
Appearance Liquid (Density: 0.932 g/cm3)
-
Masse moléculaire 204.35
-
Formule C15H24
-
Color Colorless to light yellow
-
SMILES
C[C@H]1[C@]2(C[C@H]3C(C)=CC2)[C@](CC1)([H])C3(C)C
-
Synonyms
α-cedrene
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
PLoS Biol
2024 Jun 27;22(6):e3002672. PMID: 38935621 -
bioRxiv
An efficient behavioral screening platform classifies natural products and other chemical cues according to their chemosensory valence in C. elegans. [Abstract]2024 Apr 3:2023.06.02.542933. PMID: 37333363
Solvant et solubilité
DMSO : 12.5 mg/mL (61.17 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (12.23 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (6.12 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (284 KB)
-
SDS (537 KB)
- English - EN (537 KB)
- Français - FR (537 KB)
- Deutsch - DE (537 KB)
- Norwegian - NO (537 KB)
- Español - ES (537 KB)
- Swedish - SV (537 KB)
- Italian - IT (537 KB)
- Korean - KR (537 KB)
- Portuguese - PT (537 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Tae Hwan Kim, et al. In Vivo Absorption and Disposition of α-Cedrene, a Sesquiterpene Constituent of Cedarwood Oil, in Female and Male Rats. Drug Metab Pharmacokinet. 2015 Apr;30(2):168-73. [Content Brief]
[2]. Tong, T., et al., (2018). α-Cedrene, a Newly Identified Ligand of MOR23, Increases Skeletal Muscle Mass and Strength. Molecular nutrition & food research, 62(15), e1800173. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.8936 mL | 24.4678 mL | 48.9356 mL | 122.3391 mL |
| 5 mM | 0.9787 mL | 4.8936 mL | 9.7871 mL | 24.4678 mL | |
| 10 mM | 0.4894 mL | 2.4468 mL | 4.8936 mL | 12.2339 mL | |
| 15 mM | 0.3262 mL | 1.6312 mL | 3.2624 mL | 8.1559 mL | |
| 20 mM | 0.2447 mL | 1.2234 mL | 2.4468 mL | 6.1170 mL | |
| 25 mM | 0.1957 mL | 0.9787 mL | 1.9574 mL | 4.8936 mL | |
| 30 mM | 0.1631 mL | 0.8156 mL | 1.6312 mL | 4.0780 mL | |
| 40 mM | 0.1223 mL | 0.6117 mL | 1.2234 mL | 3.0585 mL | |
| 50 mM | 0.0979 mL | 0.4894 mL | 0.9787 mL | 2.4468 mL | |
| 60 mM | 0.0816 mL | 0.4078 mL | 0.8156 mL | 2.0390 mL |