N-Hydroxyl-tryptamine
Based on 1 Customer Validation
N-Hydroxyl-tryptamine is a product formed from tryptamine catalyzed by flavin monooxygenase (FMO).
For research use only. We do not sell to patients.
- Purity: 99.17%
- CAS No.: 4761-34-6
- Formula: C10H12N2O
- Molecular Weight:176.22
-
Storage:
-80°C, stored under nitrogen
Biological Activity
Chemical Information
-
CAS No. 4761-34-6
-
Appearance Solid
-
Molecular Weight 176.22
-
Formula C10H12N2O
-
Color White to off-white
-
SMILES
ONCCC1=CNC2=C1C=CC=C2
-
Structure Classification
-
Initial Source
-
Shipping
Shipping with dry ice.
-
Storage
-80°C, stored under nitrogen
Solvent & Solubility
DMSO : 50 mg/mL (283.74 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months (stored under nitrogen). When stored at -80°C, please use it within 6 months.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months (stored under nitrogen). When stored at -80°C, please use it within 6 months.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (7.09 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (7.09 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months (stored under nitrogen). When stored at -80°C, please use it within 6 months.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 5.6747 mL | 28.3736 mL | 56.7472 mL | 141.8681 mL |
| 5 mM | 1.1349 mL | 5.6747 mL | 11.3494 mL | 28.3736 mL | |
| 10 mM | 0.5675 mL | 2.8374 mL | 5.6747 mL | 14.1868 mL | |
| 15 mM | 0.3783 mL | 1.8916 mL | 3.7831 mL | 9.4579 mL | |
| 20 mM | 0.2837 mL | 1.4187 mL | 2.8374 mL | 7.0934 mL | |
| 25 mM | 0.2270 mL | 1.1349 mL | 2.2699 mL | 5.6747 mL | |
| 30 mM | 0.1892 mL | 0.9458 mL | 1.8916 mL | 4.7289 mL | |
| 40 mM | 0.1419 mL | 0.7093 mL | 1.4187 mL | 3.5467 mL | |
| 50 mM | 0.1135 mL | 0.5675 mL | 1.1349 mL | 2.8374 mL | |
| 60 mM | 0.0946 mL | 0.4729 mL | 0.9458 mL | 2.3645 mL | |
| 80 mM | 0.0709 mL | 0.3547 mL | 0.7093 mL | 1.7734 mL | |
| 100 mM | 0.0567 mL | 0.2837 mL | 0.5675 mL | 1.4187 mL |