NOD1 agonist-1
NOD1 agonist-1 is a NOD1 agonist with immunostimulatory and adjuvant activities. NOD1 agonist-1 enhances ovalbumin-specific total IgG antibody responses in mouse vaccination models. NOD1 agonist-1 can be used for the research of immune-related diseases.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Formel: C29H54N4O8
- Molecular Weight:586.76
-
Speicherung:
Please store the product under the recommended conditions in the Certificate of Analysis.
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
Other In-stock Forms of NOD1 agonist-1
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
Beschreibung
IC50 & Target
[1]|
NOD1 |
In Vitro
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:NIH/OlaHsd (female, 2.0−2.5 months old)[1]
-
Dosage:50 μg
-
Administration:s.c.; on days 0, 21, and 42
-
Result:Induced stronger OVA-specific total IgG responses than unadjuvanted OVA or alum (100 μg).
Did not substantially alter the relative distribution of anti-OVA IgG1 and IgG2a antibody isotypes.
Chemical Information
-
Molecular Weight 586.76
-
Formel C29H54N4O8
-
SMILES
O=C(OCC)C(N)CCCC(NC(CC[C@@H](NC(CCCCCCCCCCCN)=O)C(OC)=O)=O)C(OCC)=O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Please store the product under the recommended conditions in the Certificate of Analysis.
Lösungsmittel & Löslichkeit
In Vitro:
DMSO : 100 mg/mL (170.43 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (8.52 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (8.52 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
Verweise
Complete Stock Solution Preparation Table
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7043 mL | 8.5214 mL | 17.0427 mL | 42.6069 mL |
| 5 mM | 0.3409 mL | 1.7043 mL | 3.4085 mL | 8.5214 mL | |
| 10 mM | 0.1704 mL | 0.8521 mL | 1.7043 mL | 4.2607 mL | |
| 15 mM | 0.1136 mL | 0.5681 mL | 1.1362 mL | 2.8405 mL | |
| 20 mM | 0.0852 mL | 0.4261 mL | 0.8521 mL | 2.1303 mL | |
| 25 mM | 0.0682 mL | 0.3409 mL | 0.6817 mL | 1.7043 mL | |
| 30 mM | 0.0568 mL | 0.2840 mL | 0.5681 mL | 1.4202 mL | |
| 40 mM | 0.0426 mL | 0.2130 mL | 0.4261 mL | 1.0652 mL | |
| 50 mM | 0.0341 mL | 0.1704 mL | 0.3409 mL | 0.8521 mL | |
| 60 mM | 0.0284 mL | 0.1420 mL | 0.2840 mL | 0.7101 mL | |
| 80 mM | 0.0213 mL | 0.1065 mL | 0.2130 mL | 0.5326 mL | |
| 100 mM | 0.0170 mL | 0.0852 mL | 0.1704 mL | 0.4261 mL |
NOD1 agonist-1 Related Classifications
HY-184472 Related Classifications
Powered by Bioz