Phosphoenolpyruvic acid tricyclohexylammonium salt
Based on 2 publication(s) in Google Scholar
Phosphoenolpyruvic acid (Phosphoenolpyruvate) tricyclohexylammonium salt is a glycolysis metabolite with a high-energy phosphate group. Phosphoenolpyruvic acid tricyclohexylammonium salt is involved in glycolysis and gluconeogenesis, and used as energy source to produce ATP, under the energy-limited conditions. Phosphoenolpyruvic acid tricyclohexylammonium salt also exhibits cytoprotective and anti-oxidative properties.
For research use only. We do not sell to patients.
- Purity : 99.66%
- CAS No.: 35556-70-8
- Formula: C21H44N3O6P
- Molecular Weight:465.56
-
Storage:
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications Citing Use of MedChemExpress (MCE) Phosphoenolpyruvic acid tricyclohexylammonium salt
MoreAll Endogenous Metabolite Isoforms
More
Biological Activity
Description
IC50 & Target
|
Human Endogenous Metabolite |
In Vitro
Phosphoenolpyruvic acid (0.1-10 mM) tricyclohexylammonium salt significantly attenuates the decrease in cell viability induced by hydrogen peroxide (H2O2) in HeLa cells in a dose-dependent manner. The H2O2-stimulated increase in intracellular reactive oxygen species is significantly reduced by Phosphoenolpyruvic acid tricyclohexylammonium salt[1].
Phosphoenolpyruvic acid tricyclohexylammonium salt demonstrates scavenging potential against hydroxyl radicals[1].
Phosphoenolpyruvic acid (10 mM) tricyclohexylammonium salt slightly inhibits the decrease in cellular ATP content induced by H2O2, but does not show any effects at low doses (0.1 mM and 1 mM)[1].
Phosphoenolpyruvic acid (0.1-10 mM) tricyclohexylammonium salt also attenuates the cell injury but not the decrease in intracellular ATP content, induced by 2-Deoxy-D-glucose (HY-13966), a glycolysis inhibitor[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
Chemical Information
-
CAS No. 35556-70-8
-
Appearance Solid
-
Molecular Weight 465.56
-
Formula C21H44N3O6P
-
Color White to off-white
-
SMILES
NC1CCCCC1.NC2CCCCC2.NC3CCCCC3.C=C(OP(O)(O)=O)C(O)=O
-
Synonyms
Phosphoenolpyruvate tricyclohexylammonium salt
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Cell Host Microbe
Microbiota-driven gut-brain signaling underlies antidepressant effects of a GLP-1 analog. [Abstract]2026 Jun 10;34(6):1000-1017.e5. PMID: 42269582 -
Eur J Immunol
Glycolytic metabolite phosphoenolpyruvate protects host from viral infection through promoting AATK expression. [Abstract]2023 Dec;53(12):e2350536. PMID: 37724936
Solvent & Solubility
In Vitro:
H2O : 100 mg/mL (214.80 mM; Need ultrasonic)
DMSO : < 1 mg/mL (insoluble or slightly soluble)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 50 mg/mL (107.40 mM); Clear solution; Need ultrasonic
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O | 1 mM | 2.1480 mL | 10.7398 mL | 21.4795 mL | 53.6988 mL |
| 5 mM | 0.4296 mL | 2.1480 mL | 4.2959 mL | 10.7398 mL | |
| 10 mM | 0.2148 mL | 1.0740 mL | 2.1480 mL | 5.3699 mL | |
| 15 mM | 0.1432 mL | 0.7160 mL | 1.4320 mL | 3.5799 mL | |
| 20 mM | 0.1074 mL | 0.5370 mL | 1.0740 mL | 2.6849 mL | |
| 25 mM | 0.0859 mL | 0.4296 mL | 0.8592 mL | 2.1480 mL | |
| 30 mM | 0.0716 mL | 0.3580 mL | 0.7160 mL | 1.7900 mL | |
| 40 mM | 0.0537 mL | 0.2685 mL | 0.5370 mL | 1.3425 mL | |
| 50 mM | 0.0430 mL | 0.2148 mL | 0.4296 mL | 1.0740 mL | |
| 60 mM | 0.0358 mL | 0.1790 mL | 0.3580 mL | 0.8950 mL | |
| 80 mM | 0.0268 mL | 0.1342 mL | 0.2685 mL | 0.6712 mL | |
| 100 mM | 0.0215 mL | 0.1074 mL | 0.2148 mL | 0.5370 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.