PSEN1-IN-2
Based on 1 Customer Validation
PSEN1-IN-2 (Compound 13K) is a PSEN1 inhibitor. PSEN1-IN-2 inhibits PSEN1-APH1A and PSEN1-APH1B complex with IC50s of 6.9 and 2.4 nM. PSEN1-IN-2 can be used for Alzheimer's disease research.
For research use only. We do not sell to patients.
- Purity : 99.72%
- CAS No.: 3054220-07-1
- Formula: C20H18ClFN2O3S
- Molecular Weight:420.88
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Biological Activity
Description
IC50 & Target
6.9 and 2.4 nM for PSEN1-APH1A and PSEN1-APH1B complex[1]
Chemical Information
-
CAS No. 3054220-07-1
-
Appearance Solid
-
Molecular Weight 420.88
-
Formula C20H18ClFN2O3S
-
Color Off-white to gray
-
SMILES
O[C@H]1C[C@@H]2CC[C@H]1[C@H](N2S(C3=CC=C(Cl)C=C3)(=O)=O)C4=CC=C(C#N)C=C4F
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
In Vitro:
DMSO : 100 mg/mL (237.60 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.94 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.94 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (280 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3760 mL | 11.8799 mL | 23.7597 mL | 59.3994 mL |
| 5 mM | 0.4752 mL | 2.3760 mL | 4.7519 mL | 11.8799 mL | |
| 10 mM | 0.2376 mL | 1.1880 mL | 2.3760 mL | 5.9399 mL | |
| 15 mM | 0.1584 mL | 0.7920 mL | 1.5840 mL | 3.9600 mL | |
| 20 mM | 0.1188 mL | 0.5940 mL | 1.1880 mL | 2.9700 mL | |
| 25 mM | 0.0950 mL | 0.4752 mL | 0.9504 mL | 2.3760 mL | |
| 30 mM | 0.0792 mL | 0.3960 mL | 0.7920 mL | 1.9800 mL | |
| 40 mM | 0.0594 mL | 0.2970 mL | 0.5940 mL | 1.4850 mL | |
| 50 mM | 0.0475 mL | 0.2376 mL | 0.4752 mL | 1.1880 mL | |
| 60 mM | 0.0396 mL | 0.1980 mL | 0.3960 mL | 0.9900 mL | |
| 80 mM | 0.0297 mL | 0.1485 mL | 0.2970 mL | 0.7425 mL | |
| 100 mM | 0.0238 mL | 0.1188 mL | 0.2376 mL | 0.5940 mL |