(rac)-NDT-19795
Based on 1 Customer Validation
(rac)-NDT-19795 is the racemate of NDT-19795 (HY-158024). NDT-19795 is an effective inhibitor of the NLRP3 inflammasome with an IC50 value of 66 nM in the PBMC method and 4.7 μM in the WB method. NDT-19795 is a carboxylic acid-active substance that can be converted from NT-0796 (HY-156438) within cells. NDT-19795 can be used for the studies of inflammation and neurological diseases.
For research use only. We do not sell to patients.
- Purity: 99.34%
- CAS No.: 2272918-42-8
- Formula: C20H21N3O4
- Molecular Weight:367.40
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
Chemical Information
-
CAS No. 2272918-42-8
-
Appearance Solid
-
Molecular Weight 367.40
-
Formula C20H21N3O4
-
Color White to off-white
-
SMILES
OC(C(CC1=NC=CC=N1)OC(NC2=C3C(CCC3)=CC4=C2CCC4)=O)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (272.18 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.80 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7218 mL | 13.6091 mL | 27.2183 mL | 68.0457 mL |
| 5 mM | 0.5444 mL | 2.7218 mL | 5.4437 mL | 13.6091 mL | |
| 10 mM | 0.2722 mL | 1.3609 mL | 2.7218 mL | 6.8046 mL | |
| 15 mM | 0.1815 mL | 0.9073 mL | 1.8146 mL | 4.5364 mL | |
| 20 mM | 0.1361 mL | 0.6805 mL | 1.3609 mL | 3.4023 mL | |
| 25 mM | 0.1089 mL | 0.5444 mL | 1.0887 mL | 2.7218 mL | |
| 30 mM | 0.0907 mL | 0.4536 mL | 0.9073 mL | 2.2682 mL | |
| 40 mM | 0.0680 mL | 0.3402 mL | 0.6805 mL | 1.7011 mL | |
| 50 mM | 0.0544 mL | 0.2722 mL | 0.5444 mL | 1.3609 mL | |
| 60 mM | 0.0454 mL | 0.2268 mL | 0.4536 mL | 1.1341 mL | |
| 80 mM | 0.0340 mL | 0.1701 mL | 0.3402 mL | 0.8506 mL | |
| 100 mM | 0.0272 mL | 0.1361 mL | 0.2722 mL | 0.6805 mL |