SGLT2-IN-1
Based on 1 Customer Validation
SGLT2-IN-1 (Compound 5) is an inhibitor for sodium-dependent glucose cotransporter (SGLT2), with IC50 of 33 nM in CHO cells transfected with human SGLT2. SGLT2-IN-1 is selective for SGLT2 over SGLT1. SGLT2-IN-1 is an active metabolite of dapagliflozinactive metabolite of dapagliflozin.
For research use only. We do not sell to patients.
- Purity: 99.82%
- CAS No.: 864070-37-1
- Formula: C19H21ClO6
- Molecular Weight:380.82
-
Storage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
|
SGLT2 33 nM (IC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| CHO | IC50 |
33 nM
Compound: 5
|
Inhibition of human SGLT2 expressed in CHO cells assessed as [14C]alpha-methyl-D-glucopyranoside uptake by fluorescence polarization assay
Inhibition of human SGLT2 expressed in CHO cells assessed as [14C]alpha-methyl-D-glucopyranoside uptake by fluorescence polarization assay
|
[PMID: 18755586] |
| COS-7 | IC50 |
9.4 nM
Compound: 36
|
Inhibition of human SGLT2 expressed in african green monkey COS7 cells assessed as inhibition of [14C]-methyl-alpha-D-glucopyranoside uptake after 2 hrs by scintillation counting in presence of 25 % human plasma
Inhibition of human SGLT2 expressed in african green monkey COS7 cells assessed as inhibition of [14C]-methyl-alpha-D-glucopyranoside uptake after 2 hrs by scintillation counting in presence of 25 % human plasma
|
[PMID: 21737266] |
| HEK293 | IC50 |
970 nM
Compound: 36
|
Inhibition of human SGLT1 expressed in human 293 cells assessed as inhibition of [14C]-methyl-alpha-D-glucopyranoside uptake after 1.5 hrs by scintillation counting in presence of 25 % human plasma
Inhibition of human SGLT1 expressed in human 293 cells assessed as inhibition of [14C]-methyl-alpha-D-glucopyranoside uptake after 1.5 hrs by scintillation counting in presence of 25 % human plasma
|
[PMID: 21737266] |
SGLT2-IN-1, with an IC50 value of 9.4 nM in 293 cells expressing hSGLT2 and 970 nM in COS-7 cells expressing hSGLT1[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 864070-37-1
-
Appearance Solid
-
Molecular Weight 380.82
-
Formula C19H21ClO6
-
Color White to off-white
-
SMILES
O[C@H]1[C@H](C2=CC(CC3=CC=C(C=C3)O)=C(C=C2)Cl)O[C@@H]([C@H]([C@@H]1O)O)CO
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvent & Solubility
DMSO : 100 mg/mL (262.59 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (13.13 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (13.13 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (623 KB)
- English - EN (623 KB)
- Français - FR (623 KB)
- Deutsch - DE (623 KB)
- Norwegian - NO (623 KB)
- Español - ES (623 KB)
- Swedish - SV (623 KB)
- Italian - IT (623 KB)
- Korean - KR (623 KB)
- Portuguese - PT (623 KB)
-
Handling Instructions (2659 KB)
References
[1]. Lansdell MI, et al., Design and synthesis of fluorescent SGLT2 inhibitors. Bioorg Med Chem Lett. 2008 Sep 15;18(18):4944-7. [Content Brief]
[2]. Xu B, Feng Y, et al. C-aryl glucosides substituted at the 4'-position as potent and selective renal sodium-dependent glucose co-transporter 2 (SGLT2) inhibitors for the treatment of type 2 diabetes. Bioorg Med Chem Lett. 2011 Aug 1;21(15):4465-70. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6259 mL | 13.1296 mL | 26.2591 mL | 65.6478 mL |
| 5 mM | 0.5252 mL | 2.6259 mL | 5.2518 mL | 13.1296 mL | |
| 10 mM | 0.2626 mL | 1.3130 mL | 2.6259 mL | 6.5648 mL | |
| 15 mM | 0.1751 mL | 0.8753 mL | 1.7506 mL | 4.3765 mL | |
| 20 mM | 0.1313 mL | 0.6565 mL | 1.3130 mL | 3.2824 mL | |
| 25 mM | 0.1050 mL | 0.5252 mL | 1.0504 mL | 2.6259 mL | |
| 30 mM | 0.0875 mL | 0.4377 mL | 0.8753 mL | 2.1883 mL | |
| 40 mM | 0.0656 mL | 0.3282 mL | 0.6565 mL | 1.6412 mL | |
| 50 mM | 0.0525 mL | 0.2626 mL | 0.5252 mL | 1.3130 mL | |
| 60 mM | 0.0438 mL | 0.2188 mL | 0.4377 mL | 1.0941 mL | |
| 80 mM | 0.0328 mL | 0.1641 mL | 0.3282 mL | 0.8206 mL | |
| 100 mM | 0.0263 mL | 0.1313 mL | 0.2626 mL | 0.6565 mL |
Powered by Bioz