tert-Pentylbenzene
Based on 1 Customer Validation
tert-Pentylbenzene (tert-Amylbenzene), a volatile aromatic hydrocarbon, is a fungal metabolite. tert-Pentylbenzene can be isolated from the saprophytic fungus Memnoniella sp. .
For research use only. We do not sell to patients.
- CAS No.: 2049-95-8
- Formula: C11H16
- Molecular Weight:148.24
-
Storage:
Store at room temperature 3 years.
In solvent -80°C, 2 years , -20°C, 1 year
All Endogenous Metabolite Isoforms
More
Biological Activity
Description
Chemical Information
-
CAS No. 2049-95-8
-
Appearance Liquid
-
Molecular Weight 148.24
-
Formula C11H16
-
SMILES
CC(C)(CC)C1=CC=CC=C1
-
Synonyms
tert-Amylbenzene
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Store at room temperature 3 years
In solvent -80°C 2 years -20°C 1 year
Solvent & Solubility
In Vitro:
DMSO : 100 mg/mL (674.58 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (16.86 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (16.86 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (748 KB)
- English - EN (748 KB)
- Français - FR (748 KB)
- Deutsch - DE (748 KB)
- Norwegian - NO (748 KB)
- Español - ES (748 KB)
- Swedish - SV (748 KB)
- Italian - IT (748 KB)
- Korean - KR (748 KB)
- Portuguese - PT (748 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 6.7458 mL | 33.7291 mL | 67.4582 mL | 168.6454 mL |
| 5 mM | 1.3492 mL | 6.7458 mL | 13.4916 mL | 33.7291 mL | |
| 10 mM | 0.6746 mL | 3.3729 mL | 6.7458 mL | 16.8645 mL | |
| 15 mM | 0.4497 mL | 2.2486 mL | 4.4972 mL | 11.2430 mL | |
| 20 mM | 0.3373 mL | 1.6865 mL | 3.3729 mL | 8.4323 mL | |
| 25 mM | 0.2698 mL | 1.3492 mL | 2.6983 mL | 6.7458 mL | |
| 30 mM | 0.2249 mL | 1.1243 mL | 2.2486 mL | 5.6215 mL | |
| 40 mM | 0.1686 mL | 0.8432 mL | 1.6865 mL | 4.2161 mL | |
| 50 mM | 0.1349 mL | 0.6746 mL | 1.3492 mL | 3.3729 mL | |
| 60 mM | 0.1124 mL | 0.5622 mL | 1.1243 mL | 2.8108 mL | |
| 80 mM | 0.0843 mL | 0.4216 mL | 0.8432 mL | 2.1081 mL | |
| 100 mM | 0.0675 mL | 0.3373 mL | 0.6746 mL | 1.6865 mL |