Theodrenaline hydrochloride
Based on 1 Customer Validation
Theodrenaline hydrochloride is a cardiac stimulant, also acts as an anti-hypotensive agent together with Cafedrine.
For research use only. We do not sell to patients.
- Purity: 99.67%
- CAS No.: 2572-61-4
- Formula: C17H22ClN5O5
- Molecular Weight:411.84
-
Storage:
Please store the product under the recommended conditions in the Certificate of Analysis.
Biological Activity
Akrinor evokes a positive inotropic effect in human atrial trabeculae via stimulation of β-adrenoceptors (AR)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2572-61-4
-
Appearance Solid
-
Molecular Weight 411.84
-
Formula C17H22ClN5O5
-
Color Off-white to light yellow
-
SMILES
O=C(N1C)N(C)C2=C(N(CCNCC(C3=CC=C(O)C(O)=C3)O)C=N2)C1=O.[H]Cl
-
Synonyms
(±)-Theodrenaline hydrochloride
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Please store the product under the recommended conditions in the Certificate of Analysis.
Solvent & Solubility
DMSO : 100 mg/mL (242.81 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.07 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.07 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (557 KB)
- English - EN (557 KB)
- Français - FR (557 KB)
- Deutsch - DE (557 KB)
- Norwegian - NO (557 KB)
- Español - ES (557 KB)
- Swedish - SV (557 KB)
- Italian - IT (557 KB)
- Korean - KR (557 KB)
- Portuguese - PT (557 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4281 mL | 12.1406 mL | 24.2813 mL | 60.7032 mL |
| 5 mM | 0.4856 mL | 2.4281 mL | 4.8563 mL | 12.1406 mL | |
| 10 mM | 0.2428 mL | 1.2141 mL | 2.4281 mL | 6.0703 mL | |
| 15 mM | 0.1619 mL | 0.8094 mL | 1.6188 mL | 4.0469 mL | |
| 20 mM | 0.1214 mL | 0.6070 mL | 1.2141 mL | 3.0352 mL | |
| 25 mM | 0.0971 mL | 0.4856 mL | 0.9713 mL | 2.4281 mL | |
| 30 mM | 0.0809 mL | 0.4047 mL | 0.8094 mL | 2.0234 mL | |
| 40 mM | 0.0607 mL | 0.3035 mL | 0.6070 mL | 1.5176 mL | |
| 50 mM | 0.0486 mL | 0.2428 mL | 0.4856 mL | 1.2141 mL | |
| 60 mM | 0.0405 mL | 0.2023 mL | 0.4047 mL | 1.0117 mL | |
| 80 mM | 0.0304 mL | 0.1518 mL | 0.3035 mL | 0.7588 mL | |
| 100 mM | 0.0243 mL | 0.1214 mL | 0.2428 mL | 0.6070 mL |