Ziyuglycoside I
Based on 1 publication(s) in Google Scholar
Ziyuglycoside I isolated from S. officinalis root, has anti-wrinkle activity, and increases the expression of type I collagen. Ziyuglycoside I could be used as an active ingredient for cosmetics. Ziyuglycoside I triggers cell cycle arrest and apoptosis mediated by p53, it can be a potential agent candidate for treating triple-negative breast cancer (TNBC).
For research use only. We do not sell to patients.
- Purity: 99.70%
- CAS No.: 35286-58-9
- Formula: C41H66O13
- Molecular Weight:766.96
-
Storage:
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications Citing Use of MedChemExpress (MCE) Ziyuglycoside I
More
Biological Activity
Ziyuglycoside I (5-160 μM; 24 hours) reveals a marked anti-proliferation activity with an IC50 value of 13.96 μM in MDA-MB-231 cells[2]. Ziyuglycoside I (5-20 μM; 24 hours) induces MDA-MB-231 cell apoptosis by increasing the percentage of apoptotic cells from 2.43% to 44.76% at 20 μM[2]. Ziyuglycoside I (5-20 μM; 24 hours) induces the cleavage of caspas-8, caspase-9, and caspase-3, up-regulates the pro-apoptotic protein Bax, and down-regulates anti-apoptotic protein Bal-2, dose-dependently reduces the level of mito-cyto c expression[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MDA-MB-231 cells
-
Concentration:5 µM, 10 µM, 20 µM, 40 µM, 80 µM, and 160 µM
-
Incubation Time:24 hours
-
Result:Showed cytotoxicity on MDA-MB-231 cells.
-
Cell Line:MDA-MB-231 cells
-
Concentration:5 µM, 10 µM, and 20 µM
-
Incubation Time:24 hours
-
Result:Induced G2/M phase arrest and apoptosis on MDA-MB-231 Cells
-
Cell Line:MDA-MB-231 cells
-
Concentration:5 µM, 10 µM, and 20 µM
-
Incubation Time:24 hours
-
Result:Induced apoptosis in MDA-MB-231 Cells through Intrinsic and Extrinsic Pathways.
Chemical Information
-
CAS No. 35286-58-9
-
Appearance Solid
-
Molecular Weight 766.96
-
Formula C41H66O13
-
Color White to off-white
-
SMILES
O[C@@H]1[C@@H](O)[C@]([H])(O[C@@H]2C(C)(C)[C@@](CC[C@]3(C)[C@]4([H])CC=C5[C@@]3(C)CC[C@]6(C(O[C@H]7[C@H](O)[C@@H](O)[C@H](O)[C@@H](CO)O7)=O)[C@@]5([H])[C@@](O)(C)[C@H](C)CC6)([H])[C@]4(C)CC2)OC[C@@H]1O
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
Solvent & Solubility
Methanol : 125 mg/mL (162.98 mM; Need ultrasonic)
DMSO : 100 mg/mL (130.38 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (2.71 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (2.71 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (277 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Kim YH, et al. Anti-wrinkle activity of ziyuglycoside I isolated from a Sanguisorba officinalis root extract and its application as a cosmeceutical ingredient. Biosci Biotechnol Biochem. 2008 Feb;72(2):303-11. Epub 2008 Feb 7. [Content Brief]
[2]. Zhu X, et al. Ziyuglycoside I Inhibits the Proliferation of MDA-MB-231 Breast Carcinoma Cells through Inducing p53-Mediated G2/M Cell Cycle Arrest and Intrinsic/Extrinsic Apoptosis. Int J Mol Sci. 2016 Nov 22;17(11). pii: E1903 [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / Methanol | 1 mM | 1.3038 mL | 6.5192 mL | 13.0385 mL | 32.5962 mL |
| 5 mM | 0.2608 mL | 1.3038 mL | 2.6077 mL | 6.5192 mL | |
| 10 mM | 0.1304 mL | 0.6519 mL | 1.3038 mL | 3.2596 mL | |
| 15 mM | 0.0869 mL | 0.4346 mL | 0.8692 mL | 2.1731 mL | |
| 20 mM | 0.0652 mL | 0.3260 mL | 0.6519 mL | 1.6298 mL | |
| 25 mM | 0.0522 mL | 0.2608 mL | 0.5215 mL | 1.3038 mL | |
| 30 mM | 0.0435 mL | 0.2173 mL | 0.4346 mL | 1.0865 mL | |
| 40 mM | 0.0326 mL | 0.1630 mL | 0.3260 mL | 0.8149 mL | |
| 50 mM | 0.0261 mL | 0.1304 mL | 0.2608 mL | 0.6519 mL | |
| 60 mM | 0.0217 mL | 0.1087 mL | 0.2173 mL | 0.5433 mL | |
| 80 mM | 0.0163 mL | 0.0815 mL | 0.1630 mL | 0.4075 mL | |
| 100 mM | 0.0130 mL | 0.0652 mL | 0.1304 mL | 0.3260 mL |