3-Ferrocenylpropionic anhydride
Based on 1 Customer Validation
3-Ferrocenylpropionic anhydride is an important organic compound with good biological activity. 3-Ferrocenylpropionic anhydride is widely used in compound synthesis and can be used as a synthetic intermediate to participate in the production of a variety of biologically active compounds. 3-Ferrocenylpropionic anhydride exhibits potential anti-tumor properties by regulating specific enzyme activities.
For research use only. We do not sell to patients.
- Purity : 99.9%
- CAS No.: 132098-76-1
- Formula: C26H26Fe2O3
- Molecular Weight:498.17
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
-
Help & FAQs
All Endogenous Metabolite Isoforms
More
Biological Activity
Description
Chemical Information
-
CAS No. 132098-76-1
-
Appearance Solid
-
Molecular Weight 498.17
-
Formula C26H26Fe2O3
-
Color Yellow to brown
-
SMILES
[][Fe][].O=C(OC(CCc1cccc1)=O)CCc2cccc2.[][Fe][].c3cccc3.c4cccc4
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
In Vitro:
DMSO : ≥ 100 mg/mL (200.73 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.02 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.02 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (248 KB)
-
SDS (416 KB)
- English - EN (416 KB)
- Français - FR (416 KB)
- Deutsch - DE (416 KB)
- Norwegian - NO (416 KB)
- Español - ES (416 KB)
- Swedish - SV (416 KB)
- Italian - IT (416 KB)
- Korean - KR (416 KB)
- Portuguese - PT (416 KB)
-
Handling Instructions (2659 KB)
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0073 mL | 10.0367 mL | 20.0735 mL | 50.1837 mL |
| 5 mM | 0.4015 mL | 2.0073 mL | 4.0147 mL | 10.0367 mL | |
| 10 mM | 0.2007 mL | 1.0037 mL | 2.0073 mL | 5.0184 mL | |
| 15 mM | 0.1338 mL | 0.6691 mL | 1.3382 mL | 3.3456 mL | |
| 20 mM | 0.1004 mL | 0.5018 mL | 1.0037 mL | 2.5092 mL | |
| 25 mM | 0.0803 mL | 0.4015 mL | 0.8029 mL | 2.0073 mL | |
| 30 mM | 0.0669 mL | 0.3346 mL | 0.6691 mL | 1.6728 mL | |
| 40 mM | 0.0502 mL | 0.2509 mL | 0.5018 mL | 1.2546 mL | |
| 50 mM | 0.0401 mL | 0.2007 mL | 0.4015 mL | 1.0037 mL | |
| 60 mM | 0.0335 mL | 0.1673 mL | 0.3346 mL | 0.8364 mL | |
| 80 mM | 0.0251 mL | 0.1255 mL | 0.2509 mL | 0.6273 mL | |
| 100 mM | 0.0201 mL | 0.1004 mL | 0.2007 mL | 0.5018 mL |
3-Ferrocenylpropionic anhydride Related Classifications
HY-W698250 Related Classifications
Powered by Bioz