BRD7552
Based on 1 Customer Validation
BRD7552, a potent PDX1 transcription factor inducer, upregulates PDX1 expression in both primary human islets and ductal cells, and induces epigenetic changes in the PDX1 promoter consistent with transcriptional activation. BRD7552 increases insulin expression. PDX1 is a key transcription factor involved in pancreas development and β cell function.
For research use only. We do not sell to patients.
- Purity: 99.81%
- CAS No.: 1137359-47-7
- Formula: C33H33N3O15
- Molecular Weight:711.63
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Transcription Factor-Targeted Library
HY-L090
-
Heterocyclic Compound Library
HY-L138
-
Metabolic Enzyme Compound Library
HY-L146
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
-
Protein Tyrosine Kinase Compound Library
HY-L016
-
Anti-Aging Compound Library
HY-L034
Biological Activity
BRD7552 (0-5 μM; 5 days) induces a dose-dependent increase in PDX1 protein levels after BRD7552 treatment in PANC-1 cells[1].
BRD7552 acts in a FOXA2-dependent manner to increase PDX1 expression in human ductal cells. Nine-day treatment of PANC-1 cells with BRD7552 (0-10 μM) causes a dose-dependent increase in insulin mRNA expression. BRD7552 induces insulin expression in PANC-1 cells. BRD7552 increases H3 acetylation and H3K4me3 and decreases H3K9me3, results that are consistent with transcriptional activation of PDX1. The epigenetic changes induced by BRD7552 are consistent with transcriptional activation, and BRD7552 acts in a FOXA2-dependent manner[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:PANC-1 cells
-
Concentration:1.25, 2.5, 5 μM
-
Incubation Time:5 days
-
Result:Induced a dose-dependent increase in PDX1 protein levels.
Chemical Information
-
CAS No. 1137359-47-7
-
Appearance Solid
-
Molecular Weight 711.63
-
Formula C33H33N3O15
-
Color White to off-white
-
SMILES
OC[C@@H](O1)[C@@H](OC(NC2=CC=C(C(OCC)=O)C=C2)=O)[C@H](OC(NC3=CC=C(OCO4)C4=C3)=O)[C@@H](OC(NC5=CC=C(OCO6)C6=C5)=O)[C@H]1OC
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (140.52 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (3.51 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (280 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.4052 mL | 7.0261 mL | 14.0522 mL | 35.1306 mL |
| 5 mM | 0.2810 mL | 1.4052 mL | 2.8104 mL | 7.0261 mL | |
| 10 mM | 0.1405 mL | 0.7026 mL | 1.4052 mL | 3.5131 mL | |
| 15 mM | 0.0937 mL | 0.4684 mL | 0.9368 mL | 2.3420 mL | |
| 20 mM | 0.0703 mL | 0.3513 mL | 0.7026 mL | 1.7565 mL | |
| 25 mM | 0.0562 mL | 0.2810 mL | 0.5621 mL | 1.4052 mL | |
| 30 mM | 0.0468 mL | 0.2342 mL | 0.4684 mL | 1.1710 mL | |
| 40 mM | 0.0351 mL | 0.1757 mL | 0.3513 mL | 0.8783 mL | |
| 50 mM | 0.0281 mL | 0.1405 mL | 0.2810 mL | 0.7026 mL | |
| 60 mM | 0.0234 mL | 0.1171 mL | 0.2342 mL | 0.5855 mL | |
| 80 mM | 0.0176 mL | 0.0878 mL | 0.1757 mL | 0.4391 mL | |
| 100 mM | 0.0141 mL | 0.0703 mL | 0.1405 mL | 0.3513 mL |
BRD7552 Related Classifications
HY-19694 Related Classifications
Powered by Bioz