Clofilium tosylate
Based on 1 publication(s) in Google Scholar
Clofilium tosylate, a potassium channel blocker, induces apoptosis of human promyelocytic leukemia (HL-60) cells via Bcl-2-insensitive activation of caspase-3. Antiarrhythmic agent.
For research use only. We do not sell to patients.
- Purity: 99.60%
- CAS No.: 92953-10-1
- Formula: C28H44ClNO3S
- Molecular Weight:510.17
-
Storage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications Citing Use of MedChemExpress (MCE) Clofilium tosylate
More
Biological Activity
Potassium channel[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HEK293 | IC50 |
2 nM
Compound: 1
|
Displacement of [3H]astemizole from human ERG channel expressed in HEK293 cell membrane after 1 hr by scintillation counting analysis
Displacement of [3H]astemizole from human ERG channel expressed in HEK293 cell membrane after 1 hr by scintillation counting analysis
|
[PMID: 24224763] |
| HEK293 | IC50 |
50 nM
Compound: 1
|
Inhibition of human ERG channel expressed in HEK293 cells after 15 mins by whole-cell patch clamp technique
Inhibition of human ERG channel expressed in HEK293 cells after 15 mins by whole-cell patch clamp technique
|
[PMID: 24224763] |
| Huh-7 | CC50 |
>10 μM
Compound: GNF-Pf-3889
|
NOVARTIS: Cytotoxicity against human hepatocellular carcinoma cell line (Huh7)
NOVARTIS: Cytotoxicity against human hepatocellular carcinoma cell line (Huh7)
|
[PMID: 18579783] |
HL-60 cells treated with Clofilium (0-20 μM; 24, 48, and 72 hours) lead to suppression of viability and proliferation in both time and concentration-dependent manners. Cell viability decreases significantly in HL-60 cells treated with 2.5 μM to 10 μM of Clofilium[1].
?
Clofilium (10 μM, 12 hours) induces the proteolytic cleavage of inactive procaspase-3, p34 into its active form, p17 and subsequent cleavage of its substrate PARP at 2 h after exposure to 10 mM Clofilium. However, there is no significant change in expression of Bcl-2 and Bax proteins[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HL-60 cells
-
Concentration:0-20 μM
-
Incubation Time:24, 48, and 72 hours
-
Result:Inhibited HL-60 cells with IC50s of 6.3 μM for 24 hours, 3.4 μM for 48 hours, 2.4 μM for 72 hours, respectively.
-
Cell Line:HL-60 cells
-
Concentration:10 μM
-
Incubation Time:12 hours
-
Result:Induced proteolytic cleavage of caspase-3 and subsequent cleavage of its substrate, PARP, while Bcl-2 and Bax proteins were unaltered.
Chemical Information
-
CAS No. 92953-10-1
-
Appearance Solid
-
Molecular Weight 510.17
-
Formula C28H44ClNO3S
-
Color White to off-white
-
SMILES
CCCCCCC[N+](CC)(CCCCC1=CC=C(Cl)C=C1)CC.O=S(C2=CC=C(C)C=C2)([O-])=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Andrology
Pharmacological inhibition of KSper impairs flagellar pH homeostasis of human spermatozoa. [Abstract]2025 Oct;13(7):1805-1815. PMID: 39498893
Solvent & Solubility
DMSO : 100 mg/mL (196.01 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 1.59 mg/mL (3.12 mM; ultrasonic and warming and heat to 60°C)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.08 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.08 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 8 g/L NaCl solution
Solubility: 2 mg/mL (3.92 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (392 KB)
- English - EN (392 KB)
- Français - FR (392 KB)
- Deutsch - DE (392 KB)
- Norwegian - NO (392 KB)
- Español - ES (392 KB)
- Swedish - SV (392 KB)
- Italian - IT (392 KB)
- Korean - KR (392 KB)
- Portuguese - PT (392 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 1.9601 mL | 9.8007 mL | 19.6013 mL | 49.0033 mL |
| DMSO | 5 mM | 0.3920 mL | 1.9601 mL | 3.9203 mL | 9.8007 mL |
| 10 mM | 0.1960 mL | 0.9801 mL | 1.9601 mL | 4.9003 mL | |
| 15 mM | 0.1307 mL | 0.6534 mL | 1.3068 mL | 3.2669 mL | |
| 20 mM | 0.0980 mL | 0.4900 mL | 0.9801 mL | 2.4502 mL | |
| 25 mM | 0.0784 mL | 0.3920 mL | 0.7841 mL | 1.9601 mL | |
| 30 mM | 0.0653 mL | 0.3267 mL | 0.6534 mL | 1.6334 mL | |
| 40 mM | 0.0490 mL | 0.2450 mL | 0.4900 mL | 1.2251 mL | |
| 50 mM | 0.0392 mL | 0.1960 mL | 0.3920 mL | 0.9801 mL | |
| 60 mM | 0.0327 mL | 0.1633 mL | 0.3267 mL | 0.8167 mL | |
| 80 mM | 0.0245 mL | 0.1225 mL | 0.2450 mL | 0.6125 mL | |
| 100 mM | 0.0196 mL | 0.0980 mL | 0.1960 mL | 0.4900 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.