PF-8380 hydrochloride
Based on 5 publication(s) in Google Scholar
PF-8380 hydrochloride is a potent autotaxin inhibitor with an IC50 of 2.8 nM in isolated enzyme assay and 101 nM in human whole blood.
For research use only. We do not sell to patients.
- Purity: 99.14%
- CAS No.: 2070015-01-7
- Formula: C22H22Cl3N3O5
- Molecular Weight:514.79
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications Citing Use of MedChemExpress (MCE) PF-8380 hydrochloride
More-
WB
Biological Activity
|
Autotaxin 2.8 nM (IC50, In isolated enzyme assay) |
PF-8380 also inhibits rat autotaxin with an IC50 of 1.16 nM with FS-3 substrate. Potency of PF-8380 is maintained when using enzyme produced from fetal fibroblasts used in combination with lysophosphatidyl choline (LPC) as a substrate. In human whole blood incubated with PF-8380 for 2 h, autotaxin is inhibited with an IC50 of 101 nM[1]. Autotaxin (ATX), an enzyme with lysophospholipase D (lysoPLD) activity, catalyzes the production of lysophosphatidic acid (LPA) from lysophosphatidylcholine (LPC). Pre-treatment of GL261 and U87-MG cells with 1 μM PF-8380 followed by 4 Gy irradiation results in decreased clonogenic survival, decreases migration (33% in GL261; P=0.002 and 17.9% in U87-MG; P=0.012), decreases invasion (35.6% in GL261; P=0.0037 and 31.8% in U87-MG; P=0.002), and attenuates radiation-induced Akt phosphorylation[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2070015-01-7
-
Appearance Solid
-
Molecular Weight 514.79
-
Formula C22H22Cl3N3O5
-
Color White to off-white
-
SMILES
O=C(N1CCN(CC1)CCC(C2=CC(O3)=C(C=C2)NC3=O)=O)OCC4=CC(Cl)=CC(Cl)=C4.[H]Cl
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (5)
-
Journal Impact Factor
-
Most Recent
-
Autophagy
A defective lysophosphatidic acid-autophagy axis increases miscarriage risk by restricting decidual macrophage residence. [Abstract]2022 Oct;18(10):2459-2480. PMID: 35220880 -
J Clin Invest
Autocrine lysophosphatidic acid signaling activates β-catenin and promotes lung allograft fibrosis. [Abstract]2017 Apr 3;127(4):1517-1530. PMID: 28240604
PF-8380 hydrochloride purchased from MedChemExpress. Usage Cited in: J Clin Invest. 2017 Apr 3;127(4):1517-1530. [Abstract]
Western blot analysis demonstrate decreased expression of dephosphorylated NFAT1 and total and active β-catenin proteins in allografts treated with PF-8380 (n = 4/group). All representative blots shown are from the same biological samples. Total and active β-catenin are blotted simultaneously on 2 parallel gels.
-
Cancer Lett
Combined inhibition of EZH2 and the autotaxin-LPA-LPA2 axis exerts synergistic antitumor effects on colon cancer cells. [Abstract]2023 Jul 10:566:216226. PMID: 37230222 -
J Mol Med (Berl)
Autotaxin stimulates LPA2 receptor in macrophages and exacerbates dextran sulfate sodium-induced acute colitis. [Abstract]2020 Dec;98(12):1781-1794. PMID: 33128578 -
Sci Rep
Loss of FOXF1 expression promotes human lung-resident mesenchymal stromal cell migration via ATX/LPA/LPA1 signaling axis. [Abstract]2020 Dec 4;10(1):21231. PMID: 33277571
Solvent & Solubility
DMSO : ≥ 5.2 mg/mL (10.10 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Protocol
FS-3 substrate is solubilized in assay buffer at 500 μM and frozen at -20°C in single-use aliquots for up to 4 weeks. Recombinant autotaxin is diluted in Tris-buffered saline (140 mM NaCl, 5 mM KCl, 1 mM CaCl2, 1 mM MgCl2, 50 mM Tris, pH 8.0) and incubated with compound in DMSO or DMSO alone (final 1% DMSO) for 15 min at 37°C, and the reaction is started with the addition of FS-3 at a final concentration of 1 μM. The reaction is allowed to proceed at 37°C for 30 min and monitored at 520 nm until the uninhibited control compared with a no-enzyme control gave a Z′≥0.5. IC50s are determined in triplicate by using a four-parameter fit[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
HUVEC (1×106) and bEnd.3 cells (1×106) are plated in 100 mm plates and after 24 h, U87-MG (2×106) and GL261 (2×106) cells are plated onto transwell inserts. After co-culture for 24 h, cells are treated with 1 μM of PF-8380 or vehicle control DMSO for 45 min prior to irradiation with 0, 2, 4, 6, or 8 Gy. After the treatments as co-culture with either PF-8380 or DMSO calculated numbers of U87-MG and GL261 cells are plated to enable normalization for plating efficiencies. After 7 to 10 day incubation plates are fixed with 70% EtOH and stained with 1% methylene blue. Colonies consisting of >50 cells are counted by viewing the plates under a microscope. The survival fractions are calculated as (number of colonies/number of cells plated)/(number of colonies for corresponding control/number of cells plated). Survival curves are analyzed by curve fitting to the alpha/beta model calculating D0 and n[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Rats[1]
Male Lewis rats weighing 275 to 300 g are used and acclimated to their surroundings for approximately 1 week with food and water provided ad libitum. A minimum of 1 day before study, animals are anesthetized with isoflurane (to effect) and implanted with Culex vascular catheters in the carotid artery. Animals are acclimated in Culex cages overnight before dosing. Patency of the carotid artery catheter is maintained by using the "tend" function of the Culex automated blood sampler. Animals are dosed with PF-8380 at 1, 3, 10, 30, and 100 mg/kg by oral gavage after an overnight fast. Blood collections are obtained from the carotid artery and performed by the Culex automated blood sampler at 0.25, 0.5, 1, 2, 4, 6, 8, and 24 h after administration. Blood is centrifuged, and plasma is collected for analysis of PF-8380 and LPA concentrations.
Mice[2]
GL261 cells (1×106) are injected into the right hind limb of nude mice. Once tumors are palpable the mice are serpentine sorted into groups of six to seven animals representing similar distributions of tumor sizes (range=240 mm3). Tumor bearing mice are injected intraperitoneally with vehicle (DMSO) or PF-8380 at 10 mg/kg body weight once daily for five consecutive days. Forty five minutes after drug injection, mice are anesthetized with isoflurane and positioned in the RS2000 irradiator. They are then irradiated with 2 Gy daily for five consecutive days for a total of 10 Gy. Lead blocks (10 mm thick) are used to shield the head, thorax, and abdomen. Tumor size is monitored longitudinally using an external traceable digital caliper. Mice are sacrificed by cervical dislocation once the tumors reached a volume of approximately 10 mm3 or when ulceration becomes apparent.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (279 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Gierse J, et al. A novel autotaxin inhibitor reduces lysophosphatidic acid levels in plasma and the site of inflammation. J Pharmacol Exp Ther. 2010 Jul;334(1):310-7. [Content Brief]
[2]. Bhave SR, et al. Autotaxin Inhibition with PF-8380 Enhances the Radiosensitivity of Human and Murine Glioblastoma Cell Lines. Front Oncol. 2013 Sep 17;3:236. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9425 mL | 9.7127 mL | 19.4254 mL | 48.5635 mL |
| 5 mM | 0.3885 mL | 1.9425 mL | 3.8851 mL | 9.7127 mL | |
| 10 mM | 0.1943 mL | 0.9713 mL | 1.9425 mL | 4.8563 mL |