S2101
Based on 1 Customer Validation
S2101 is a lysine-specific demethylase 1 (LSD1) inhibitor with an IC50 of 0.99 μM, Ki of 0.61 μM and Kinact/Ki of 4560 M/s.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.70%
- CAS. Nr.: 1239262-36-2
- Formel: C16H16ClF2NO
- Molecular Weight:311.76
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
Epigenetics Compound Library
HY-L005
-
Histone Modification Research Compound Library
HY-L024
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Cancer Metabolism Compound Library
HY-L083
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Methylation Compound Library
HY-L203
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
Biologische Aktivität
|
KDM1/LSD1 |
S2101 is a lysine-specific demethylase 1 (LSD1) inhibitor with an IC50 of 0.99 μM, Ki of 0.61 μM and Kinact/Ki of 4560 M/s. S2101 also displays much lower inhibition activity toward MAO-B (Ki=17 µM, Kinact/Ki=18 M/s) and MAO-A (Ki=110 µM, Kinact/Ki=60 M/s). The treatment of HEK293T cells with S2101 results in a dose-dependent increase in the level of H3K4me2, which must have accumulated by the inactivation of LSD1. During the course of S2101 treatment, the amounts of histone H3 and LSD1 in the nuclear extracts remain essentially unaffected. Because the treatment with 1 μM S2101 generates a level of H3K4me2 similar to that elicited by 50 μM 2-PCPA, S2101 is assumed to have approximately 50-fold stronger LSD1 inhibition activity than 2-PCPA in human cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 1239262-36-2
-
Appearance Solid
-
Molecular Weight 311.76
-
Formel C16H16ClF2NO
-
Color White to off-white
-
SMILES
FC1=CC(F)=CC([C@H]2[C@H](N)C2)=C1OCC3=CC=CC=C3.[Relative stereochemistry].Cl
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (320.76 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 5 mg/mL (16.04 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (16.04 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2076 mL | 16.0380 mL | 32.0760 mL | 80.1899 mL |
| 5 mM | 0.6415 mL | 3.2076 mL | 6.4152 mL | 16.0380 mL | |
| 10 mM | 0.3208 mL | 1.6038 mL | 3.2076 mL | 8.0190 mL | |
| 15 mM | 0.2138 mL | 1.0692 mL | 2.1384 mL | 5.3460 mL | |
| 20 mM | 0.1604 mL | 0.8019 mL | 1.6038 mL | 4.0095 mL | |
| 25 mM | 0.1283 mL | 0.6415 mL | 1.2830 mL | 3.2076 mL | |
| 30 mM | 0.1069 mL | 0.5346 mL | 1.0692 mL | 2.6730 mL | |
| 40 mM | 0.0802 mL | 0.4009 mL | 0.8019 mL | 2.0047 mL | |
| 50 mM | 0.0642 mL | 0.3208 mL | 0.6415 mL | 1.6038 mL | |
| 60 mM | 0.0535 mL | 0.2673 mL | 0.5346 mL | 1.3365 mL | |
| 80 mM | 0.0401 mL | 0.2005 mL | 0.4009 mL | 1.0024 mL | |
| 100 mM | 0.0321 mL | 0.1604 mL | 0.3208 mL | 0.8019 mL |
S2101 Related Classifications
HY-110277 Related Classifications
Powered by Bioz