BTA-188
Based on 1 Customer Validation
BTA-188, a pyridazinyl oxime ether, is an orally active, potent inhibitor of rhinoviruses (HRV) and enterovirus (EV) 71 in vitro. BTA-188 inhibits HRV-2 replication with an IC50 of 0.8 nM and an IC90 of 11 nM. BTA-188 inhibits enterovirus with an IC50 of 82 and an IC90 of 109 nM. BTA-188 is a potential chemotherapeutic agent for infections caused by the viruses in the Picornaviridae.
For research use only. We do not sell to patients.
- Purity : 98.60%
- CAS No.: 314062-80-1
- Formula: C21H28N4O2
- Molecular Weight:368.47
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
Description
Cellular Effect
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HeLa | EC50 |
13 ng/mL
Compound: 4, BTA 188
|
Antirhinoviral activity against antiviral-resistant Human rhinovirus A infected in human HeLa cells assessed as inhibition of virus-induced cytopathic effect after 5 days by MTT assay
Antirhinoviral activity against antiviral-resistant Human rhinovirus A infected in human HeLa cells assessed as inhibition of virus-induced cytopathic effect after 5 days by MTT assay
|
[PMID: 24900468] |
| HeLa | EC50 |
3.4 ng/mL
Compound: 4, BTA 188
|
Antirhinoviral activity against minor receptor-resistant Human rhinovirus infected in human HeLa cells assessed as inhibition of virus-induced cytopathic effect after 5 days by MTT assay
Antirhinoviral activity against minor receptor-resistant Human rhinovirus infected in human HeLa cells assessed as inhibition of virus-induced cytopathic effect after 5 days by MTT assay
|
[PMID: 24900468] |
| HeLa | EC50 |
4.6 ng/mL
Compound: 4, BTA 188
|
Antirhinoviral activity against antiviral-resistant Human rhinovirus B infected in human HeLa cells assessed as inhibition of virus-induced cytopathic effect after 5 days by MTT assay
Antirhinoviral activity against antiviral-resistant Human rhinovirus B infected in human HeLa cells assessed as inhibition of virus-induced cytopathic effect after 5 days by MTT assay
|
[PMID: 24900468] |
| HeLa | EC50 |
5 ng/mL
Compound: 4, BTA 188
|
Antirhinoviral activity against Human rhinovirus A infected in human HeLa cells assessed as inhibition of virus-induced cytopathic effect after 5 days by MTT assay
Antirhinoviral activity against Human rhinovirus A infected in human HeLa cells assessed as inhibition of virus-induced cytopathic effect after 5 days by MTT assay
|
[PMID: 24900468] |
| HeLa | EC50 |
5.45 ng/mL
Compound: 4, BTA 188
|
Antirhinoviral activity against major receptor-resistant Human rhinovirus infected in human HeLa cells assessed as inhibition of virus-induced cytopathic effect after 5 days by MTT assay
Antirhinoviral activity against major receptor-resistant Human rhinovirus infected in human HeLa cells assessed as inhibition of virus-induced cytopathic effect after 5 days by MTT assay
|
[PMID: 24900468] |
| HeLa | EC50 |
7.9 ng/mL
Compound: 4, BTA 188
|
Antirhinoviral activity against Human rhinovirus B infected in human HeLa cells assessed as inhibition of virus-induced cytopathic effect after 5 days by MTT assay
Antirhinoviral activity against Human rhinovirus B infected in human HeLa cells assessed as inhibition of virus-induced cytopathic effect after 5 days by MTT assay
|
[PMID: 24900468] |
| KB | CC50 |
16 μg/mL
Compound: 14
|
Cellular toxicity in KB cells
Cellular toxicity in KB cells
|
[PMID: 12852746] |
| KB | CC50 |
2 μg/mL
Compound: 14
|
Cellular toxicity against KB cells in HRV-2 strain
Cellular toxicity against KB cells in HRV-2 strain
|
[PMID: 12852746] |
Chemical Information
-
CAS No. 314062-80-1
-
Appearance Solid
-
Molecular Weight 368.47
-
Formula C21H28N4O2
-
Color White to off-white
-
SMILES
CCO/N=C/C(C=C1)=CC=C1OCCC(CC2)CCN2C3=NN=C(C)C=C3
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
In Vitro:
DMSO : 100 mg/mL (271.39 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.78 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.78 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (269 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7139 mL | 13.5696 mL | 27.1393 mL | 67.8481 mL |
| 5 mM | 0.5428 mL | 2.7139 mL | 5.4279 mL | 13.5696 mL | |
| 10 mM | 0.2714 mL | 1.3570 mL | 2.7139 mL | 6.7848 mL | |
| 15 mM | 0.1809 mL | 0.9046 mL | 1.8093 mL | 4.5232 mL | |
| 20 mM | 0.1357 mL | 0.6785 mL | 1.3570 mL | 3.3924 mL | |
| 25 mM | 0.1086 mL | 0.5428 mL | 1.0856 mL | 2.7139 mL | |
| 30 mM | 0.0905 mL | 0.4523 mL | 0.9046 mL | 2.2616 mL | |
| 40 mM | 0.0678 mL | 0.3392 mL | 0.6785 mL | 1.6962 mL | |
| 50 mM | 0.0543 mL | 0.2714 mL | 0.5428 mL | 1.3570 mL | |
| 60 mM | 0.0452 mL | 0.2262 mL | 0.4523 mL | 1.1308 mL | |
| 80 mM | 0.0339 mL | 0.1696 mL | 0.3392 mL | 0.8481 mL | |
| 100 mM | 0.0271 mL | 0.1357 mL | 0.2714 mL | 0.6785 mL |