PluriSIn 1
Based on 4 publication(s) in Google Scholar
PluriSIn 1 (NSC 14613) is an inhibitor of stearoyl-coA desaturase (SCD), and is a pluripotent cell-specific inhibitor.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.72%
- CAS No.: 91396-88-2
- Formule: C12H11N3O
- Masse moléculaire:213.24
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) PluriSIn 1
More
Activité biologique
SCD[1]
PluriSIn 1, a small-molecule inhibitor of stearoyl-coA desaturase (SCD), on induced pluripotent stem cells (iPS)-derived cardiomyocytes (CM). PluriSIn 1 treatment significantly decreases the mRNA and protein level of Nanog, a marker for both cell pluripotency and tumor progression; importantly, we provide evidence that PluriSIn 1 treatment at 20 μM for 1 day significantly induces the apoptosis of Nanog-positive iPS derivates (iPSD). In addition, PluriSIn 1 treatment at 20 μM for 4 days diminished Nanog-positive stem cells in cultured iPSD while not increasing apoptosis of iPS-derived CM. To investigate whether PluriSIn 1 treatment prevents tumorigenicity of iPSD after cell transplantation, we intramyocardially injected PluriSIn 1- or DMSO-treated iPSD in a mouse model of myocardial infarction (MI). DMSO-treated iPSD readily formed Nanog-expressing tumors 2 weeks after injection, which is prevented by treatment with PluriSIn 1. Moreover, treatment with PluriSIn 1 does not change the expression of cTnI, α-MHC, or MLC-2v, markers of cardiac differentiation (P>0.05, n=4). Importantly, PluriSIn 1-treated iPS-derived CM exhibits the ability to engraft and survive in the infarcted myocardium[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 91396-88-2
-
Appearance Solid
-
Masse moléculaire 213.24
-
Formule C12H11N3O
-
Color White to yellow
-
SMILES
O=C(C1=CC=NC=C1)NNC2=CC=CC=C2
-
Synonyms
NSC 14613
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
J Adv Res
LncRNA CRCMSL interferes in phospholipid unsaturation to suppress colorectal cancer progression via reducing membrane fluidity. [Abstract]2025 Feb 5:S2090-1232(25)00075-X. PMID: 39921055 -
Mol Cell
Lipidomic Analysis of α-Synuclein Neurotoxicity Identifies Stearoyl CoA Desaturase as a Target for Parkinson Treatment. [Abstract]2019 Mar 7;73(5):1001-1014.e8. PMID: 30527540 -
Sci China Life Sci
2022 Feb;65(2):341-361. PMID: 34047913 -
Int J Biol Macromol
Exogenous alpha-linolenic acid and Vibrio parahaemolyticus induce EPA and DHA levels mediated by delta-6 desaturase to enhance shrimp immunity. [Abstract]2024 Feb;257(Pt 2):128583. PMID: 38056755
Solvant et solubilité
DMSO : 80 mg/mL (375.16 mM; adjust pH to 7 with 1 M HCl; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (23.45 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (23.45 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
The differentiation of iPS cells to cardiomyocytes (CM) is induced by embryoid body (EB) formation. When iPS cells reached 70% confluency in 10-cm dishes, cells are digested using 0.25% trypsin/EDTA. Cell pellets are re-suspended in differentiation medium (DMEM with 20% FBS and 10 ng/mL BMP4) to a final concentration of 200,000 cells/mL. Cell suspensions are added to 6-well plates with Ulta-Low Attachment surfaces for 4 d to initiate EB formation. On day 5, EBs are cultured on 0.1% gelatin-coated dishes for 14 d using CF culture medium for the outgrowth of cardiac structures. At this stage, iPS cells undergoing EB formation are termed iPS derivates (iPSD)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (278 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.6896 mL | 23.4478 mL | 46.8955 mL | 117.2388 mL |
| 5 mM | 0.9379 mL | 4.6896 mL | 9.3791 mL | 23.4478 mL | |
| 10 mM | 0.4690 mL | 2.3448 mL | 4.6896 mL | 11.7239 mL | |
| 15 mM | 0.3126 mL | 1.5632 mL | 3.1264 mL | 7.8159 mL | |
| 20 mM | 0.2345 mL | 1.1724 mL | 2.3448 mL | 5.8619 mL | |
| 25 mM | 0.1876 mL | 0.9379 mL | 1.8758 mL | 4.6896 mL | |
| 30 mM | 0.1563 mL | 0.7816 mL | 1.5632 mL | 3.9080 mL | |
| 40 mM | 0.1172 mL | 0.5862 mL | 1.1724 mL | 2.9310 mL | |
| 50 mM | 0.0938 mL | 0.4690 mL | 0.9379 mL | 2.3448 mL | |
| 60 mM | 0.0782 mL | 0.3908 mL | 0.7816 mL | 1.9540 mL | |
| 80 mM | 0.0586 mL | 0.2931 mL | 0.5862 mL | 1.4655 mL | |
| 100 mM | 0.0469 mL | 0.2345 mL | 0.4690 mL | 1.1724 mL |
PluriSIn 1 Related Classifications
HY-15700 Related Classifications
Powered by Bioz