Sardomozide
Based on 9 publication(s) in Google Scholar
Sardomozide is an S-adenosylmethionine decarboxylase (SAMDC) inhibitor with an IC50 of 5 nM.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.85%
- CAS No.: 149400-88-4
- Formule: C11H14N6
- Masse moléculaire:230.27
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) Sardomozide
More- Nature. 2026 Jul;655(8121):240-250. [Abstract]
- Cell. 2020 Jun 11;181(6):1329-1345.e24. [Abstract]
- Sci Adv. 2023 May 19;9(20):eade0718. [Abstract]
- Cell Rep. 2025 Jan 28;44(1):115123. [Abstract]
- mSystems. 2024 May 16;9(5):e0024624. [Abstract]
- Metabolomics. 2025 Jun 14;21(4):82. [Abstract]
- Preprints. 2025 May 22.
- bioRxiv. 2024 Nov 17:2024.08.24.609500. [Abstract]
- SSRN. 2024 Mar 14.
Activité biologique
IC50: 5 nM (SAMDC)[1]
Sardomozide is a S-adenosylmethionine decarboxylase (SAMDC) inhibitor with an IC50 of 5 nM in cell assay. Following treatment for 48 h with 3 μM Sardomozide, intracellular SAMDC activity is reduced to 10% of control[1]. When the CHO/664 cells are grown in the presence of Sardomozide and during treatment with DENSPM, vacuole formation is not observed, and these cells are growth-inhibited and contain levels of DENSPM similar to the parental CHO cells[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 149400-88-4
-
Appearance Solid
-
Masse moléculaire 230.27
-
Formule C11H14N6
-
Color Off-white to light yellow
-
SMILES
N=C(C1=CC=CC2=C1CC/C2=N\NC(N)=N)N
-
Synonyms
CGP 48664; SAM-486A
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (9)
-
Journal Impact Factor
-
Most Recent
-
Nature
2026 Jul;655(8121):240-250. PMID: 42236947 -
Cell
2020 Jun 11;181(6):1329-1345.e24. PMID: 32445698 -
Sci Adv
Tumor-derived semaphorin 4A improves PD-1-blocking antibody efficacy by enhancing CD8+ T cell cytotoxicity and proliferation. [Abstract]2023 May 19;9(20):eade0718. PMID: 37205755 -
Cell Rep
2025 Jan 28;44(1):115123. PMID: 39932195 -
mSystems
Mucin alleviates colonic barrier dysfunction by promoting spermine accumulation through enhanced arginine metabolism in Limosilactobacillus mucosae. [Abstract]2024 May 16;9(5):e0024624. PMID: 38564708 -
Metabolomics
SAM486A-induced inhibition of AMD1: metabolic and epigenetic implications in non-small cell lung cancer cells. [Abstract]2025 Jun 14;21(4):82. PMID: 40515967 -
-
bioRxiv
2024 Nov 17:2024.08.24.609500. PMID: 39253442 -
Solvant et solubilité
DMSO : 16.67 mg/mL (72.39 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.67 mg/mL (7.25 mM); Clear solution
This protocol yields a clear solution of ≥ 1.67 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (16.7 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.67 mg/mL (7.25 mM); Clear solution
This protocol yields a clear solution of ≥ 1.67 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (16.7 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
The parent CHO cell line is chronically exposed to increasing levels of Sardomozide for at least eight passages beginning at 0.1 μM. Cell lines are serially exposed to increasing concentrations until a panel of sublines is obtained resistant to 1 (CHO/1). 3 (CHO/3), 10 (CHO/10), 30 (CHO/30), and 100 (CHO/100) μM Sardomozide for comparative studies[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (277 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Regenass U, et al. CGP 48664, a new S-adenosylmethionine decarboxylase inhibitor with broad spectrum antiproliferative and antitumor activity. Cancer Res. 1994 Jun 15;54(12):3210-7. [Content Brief]
[2]. Kramer DL, et al. Lysosomal sequestration of polyamine analogues in Chinese hamster ovary cells resistant to the S-adenosylmethionine decarboxylase inhibitor, CGP-48664. Cancer Res. 1998 Sep 1;58(17):3883-90. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.3427 mL | 21.7136 mL | 43.4273 mL | 108.5682 mL |
| 5 mM | 0.8685 mL | 4.3427 mL | 8.6855 mL | 21.7136 mL | |
| 10 mM | 0.4343 mL | 2.1714 mL | 4.3427 mL | 10.8568 mL | |
| 15 mM | 0.2895 mL | 1.4476 mL | 2.8952 mL | 7.2379 mL | |
| 20 mM | 0.2171 mL | 1.0857 mL | 2.1714 mL | 5.4284 mL | |
| 25 mM | 0.1737 mL | 0.8685 mL | 1.7371 mL | 4.3427 mL | |
| 30 mM | 0.1448 mL | 0.7238 mL | 1.4476 mL | 3.6189 mL | |
| 40 mM | 0.1086 mL | 0.5428 mL | 1.0857 mL | 2.7142 mL | |
| 50 mM | 0.0869 mL | 0.4343 mL | 0.8685 mL | 2.1714 mL | |
| 60 mM | 0.0724 mL | 0.3619 mL | 0.7238 mL | 1.8095 mL |