BMS-262084
Based on 1 Customer Validation
BMS-262084 is a potent, selective and irreversible inhibitor of factor XIa, with an IC50 of 2.8 nM against human factor XIa. BMS-262084 also inhibits human tryptase (IC50=5 nM). BMS-262084 exhibits antithrombotic effects.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 98.41%
- CAS No.: 253174-92-4
- Formule: C18H31N7O5
- Masse moléculaire:425.48
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-50903
RivaroxabanFactor Xa Inhibitor -
HY-B0597
Fondaparinux sodiumFactor Xa Inhibitor -
HY-50903R
Rivaroxaban (Standard)Factor Xa Inhibitor -
HY-137431
AsundexianFXIa Inhibitor -
HY-10268
BetrixabanFactor Xa Inhibitor -
HY-125856
MilvexianFactor Xia Antagonists -
HY-70035
OtamixabanFactor Xa Inhibitor -
HY-10267
EribaxabanFXa Inhibitor -
HY-B0385
Gabexate mesylateProteasome Inhibitor -
HY-14853
DarexabanFXa Inhibitor -
HY-10264A
Edoxaban tosylateFXa Inhibitor -
HY-10268R
Betrixaban (Standard)Factor Xa Inhibitor
Activité biologique
Description
IC50 & Target
IC50: 2.8 nM (factor XIa), 5 nM (tryptase)[1]
In Vitro
BMS-262084 shows more than 70-fold selectivity for human factor XIa (IC50=2.8 nM) over tryptase, trypsin, urokinase, plasma kallikrein, plasmin, yhrombin (factor IIa) and Factor IXa (IC50=0.005, 0.05, 0.542, 0.55, 1.7,10.5, and 17.4 μM, respectively)[1].
BMS-262084 (1-100 μM) doubles the activated thromboplastin time in human and rat plasma at 0.14 and 2.2 μM, respectively[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Sprague Dawley rats (310-390 g) were induced venous thrombosis by FeCl2[1]
-
Dosage:2 mg/kg + 2 mg/kg/h, 6 mg/kg + 6 mg/kg/h, 12 mg/kg + 12 mg/kg/h
-
Administration:I.v. 10 min before FeCl2 application
-
Result:Reduced carotid artery thrombus weight by 73% at the dose of 12 mg/kg + 12 mg/kg/h.
Improved both vessel patency and integrated flow.
Chemical Information
-
CAS No. 253174-92-4
-
Appearance Solid
-
Masse moléculaire 425.48
-
Formule C18H31N7O5
-
Color White to off-white
-
SMILES
CC(C)(NC(N1CCN(C(N2[C@H](C(O)=O)[C@@H](CCCNC(N)=N)C2=O)=O)CC1)=O)C
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
In Vitro:
DMSO : 50 mg/mL (117.51 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.88 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.88 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Schumacher WA, et, al. Antithrombotic and hemostatic effects of a small molecule factor XIa inhibitor in rats. Eur J Pharmacol. 2007 Sep 10;570(1-3):167-74. [Content Brief]
[2]. Qian X, et, al. A stereoselective synthesis of BMS-262084, an azetidinone-based tryptase inhibitor. J Org Chem. 2002 May 31;67(11):3595-600. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3503 mL | 11.7514 mL | 23.5029 mL | 58.7572 mL |
| 5 mM | 0.4701 mL | 2.3503 mL | 4.7006 mL | 11.7514 mL | |
| 10 mM | 0.2350 mL | 1.1751 mL | 2.3503 mL | 5.8757 mL | |
| 15 mM | 0.1567 mL | 0.7834 mL | 1.5669 mL | 3.9171 mL | |
| 20 mM | 0.1175 mL | 0.5876 mL | 1.1751 mL | 2.9379 mL | |
| 25 mM | 0.0940 mL | 0.4701 mL | 0.9401 mL | 2.3503 mL | |
| 30 mM | 0.0783 mL | 0.3917 mL | 0.7834 mL | 1.9586 mL | |
| 40 mM | 0.0588 mL | 0.2938 mL | 0.5876 mL | 1.4689 mL | |
| 50 mM | 0.0470 mL | 0.2350 mL | 0.4701 mL | 1.1751 mL | |
| 60 mM | 0.0392 mL | 0.1959 mL | 0.3917 mL | 0.9793 mL | |
| 80 mM | 0.0294 mL | 0.1469 mL | 0.2938 mL | 0.7345 mL | |
| 100 mM | 0.0235 mL | 0.1175 mL | 0.2350 mL | 0.5876 mL |
BMS-262084 Related Classifications
HY-118969 Related Classifications
Powered by Bioz