DMH2
Based on 1 publication(s) in Google Scholar
DMH2 is a potent BMP receptor antagonist. DMH2 downregulates the expression of Id1 and Id3 proteins, and inhibits the proliferation and induces cell death of lung cancer cell lines.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.84%
- CAS No.: 1206711-14-9
- Formule: C27H25N5O2
- Masse moléculaire:451.52
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) DMH2
More
Activité biologique
DMH2 decreases expression of Id1 and Id3 and causes growth suppression of three lung cancer cell lines with K-Ras mutation (A549, H157, H727) and three without a K-Ras mutation (H1299, H865, U1752)[1].
The combination of DMH2 and PP2 causes significantly greater reduction in Id1 promoter activity and growth inhibition than either agent alone in the A549 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6 mice (7-8 weeks, male)[2]
-
Dosage:0.5, 1, 2 mg/kg
-
Administration:IP, twice daily, for 2 days prior to PH and for 2 days after PH (partial hepatectomy)
-
Result:Increased hepatocyte proliferation from 13.7% to 26.9% at 2 mg/kg.
Chemical Information
-
CAS No. 1206711-14-9
-
Appearance Solid
-
Masse moléculaire 451.52
-
Formule C27H25N5O2
-
Color Off-white to yellow
-
SMILES
C1(C2=C3N=CC(C4=CC=C(OCCN5CCOCC5)C=C4)=CN3N=C2)=C6C=CC=CC6=NC=C1
-
Synonyms
VU364849
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
Solvant et solubilité
DMSO : 50 mg/mL (110.74 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (2.77 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (2.77 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (278 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2147 mL | 11.0737 mL | 22.1474 mL | 55.3685 mL |
| 5 mM | 0.4429 mL | 2.2147 mL | 4.4295 mL | 11.0737 mL | |
| 10 mM | 0.2215 mL | 1.1074 mL | 2.2147 mL | 5.5369 mL | |
| 15 mM | 0.1476 mL | 0.7382 mL | 1.4765 mL | 3.6912 mL | |
| 20 mM | 0.1107 mL | 0.5537 mL | 1.1074 mL | 2.7684 mL | |
| 25 mM | 0.0886 mL | 0.4429 mL | 0.8859 mL | 2.2147 mL | |
| 30 mM | 0.0738 mL | 0.3691 mL | 0.7382 mL | 1.8456 mL | |
| 40 mM | 0.0554 mL | 0.2768 mL | 0.5537 mL | 1.3842 mL | |
| 50 mM | 0.0443 mL | 0.2215 mL | 0.4429 mL | 1.1074 mL | |
| 60 mM | 0.0369 mL | 0.1846 mL | 0.3691 mL | 0.9228 mL | |
| 80 mM | 0.0277 mL | 0.1384 mL | 0.2768 mL | 0.6921 mL | |
| 100 mM | 0.0221 mL | 0.1107 mL | 0.2215 mL | 0.5537 mL |
DMH2 Related Classifications
HY-110245 Related Classifications
Powered by Bioz