Pyribencarb
Based on 1 Customer Validation
Pyribencarb is a benzylcarbamate-type fungicide, which is active against a wide range of plant pathogenic fungi. Pyribencarb is a potent Qo inhibitor of cytochrome b. Pyribencarb is especially active against Botrytis cinerea and Sclerotinia sclerotirum.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.80%
- CAS No.: 799247-52-2
- Formule: C18H20ClN3O3
- Masse moléculaire:361.83
-
Stockage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
Pyribencarb potently inhibits succinate-cytochrome c reductase (SCR) activities of Botrytis cinerea (cucumber gray mold), Corynespora cassiicola (leaf spot) and decylubiquinol-cytochrome c reductase (UCR) activity of B. cinerea. Pyribencarb inhibits the UCR of B. cinerea in an uncompetitive manner, and the substrate-dependent inhibition constant is found from calculation to be 13 nM[1].
The target site of Pyribencarb is cytochrome b of complex III in the electron transport system of the respiratory chain. The inhibitory potency of pyribencarb on SCR activities of plants, rats and carp is relatively weak compared with that of strobilurin fungicides[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 799247-52-2
-
Appearance Solid
-
Masse moléculaire 361.83
-
Formule C18H20ClN3O3
-
Color Off-white to light yellow
-
SMILES
CC1=NC(CO/N=C(C2=CC(CNC(OC)=O)=C(Cl)C=C2)\C)=CC=C1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 100 mg/mL (276.37 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.91 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.91 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (280 KB)
-
SDS (702 KB)
- English - EN (702 KB)
- Français - FR (702 KB)
- Deutsch - DE (702 KB)
- Norwegian - NO (702 KB)
- Español - ES (702 KB)
- Swedish - SV (702 KB)
- Italian - IT (702 KB)
- Korean - KR (702 KB)
- Portuguese - PT (702 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7637 mL | 13.8186 mL | 27.6373 mL | 69.0932 mL |
| 5 mM | 0.5527 mL | 2.7637 mL | 5.5275 mL | 13.8186 mL | |
| 10 mM | 0.2764 mL | 1.3819 mL | 2.7637 mL | 6.9093 mL | |
| 15 mM | 0.1842 mL | 0.9212 mL | 1.8425 mL | 4.6062 mL | |
| 20 mM | 0.1382 mL | 0.6909 mL | 1.3819 mL | 3.4547 mL | |
| 25 mM | 0.1105 mL | 0.5527 mL | 1.1055 mL | 2.7637 mL | |
| 30 mM | 0.0921 mL | 0.4606 mL | 0.9212 mL | 2.3031 mL | |
| 40 mM | 0.0691 mL | 0.3455 mL | 0.6909 mL | 1.7273 mL | |
| 50 mM | 0.0553 mL | 0.2764 mL | 0.5527 mL | 1.3819 mL | |
| 60 mM | 0.0461 mL | 0.2303 mL | 0.4606 mL | 1.1516 mL | |
| 80 mM | 0.0345 mL | 0.1727 mL | 0.3455 mL | 0.8637 mL | |
| 100 mM | 0.0276 mL | 0.1382 mL | 0.2764 mL | 0.6909 mL |
Pyribencarb Related Classifications
HY-W020043 Related Classifications
Powered by Bioz