Rohinitib
Based on 1 publication(s) in Google Scholar
Rohinitib is a potent and specific eIF4A inhibitor. Rohinitib induces cell apoptosis of acute myeloid leukemia (AML) cell lines and reduces the leukemia burden of AML xenograft model. Rohinitib can be used for the research of AML.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.87%
- CAS No.: 1139253-73-8
- Formule: C29H31NO8
- Masse moléculaire:521.56
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
Apoptosis Compound Library
HY-L003
-
Cell Cycle/DNA Damage Compound Library
HY-L004
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
-
Anti-Blood Cancer Compound Library
HY-L079
-
Highly Selective Inhibitors Library
HY-L158
-
Highly Selective Activators Library
HY-L159
-
Cell Death Library
HY-L162
-
Anti-Hematopathy Compound Library
HY-L171
-
MCE Bioactive Compound Library
HY-L001V
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) Rohinitib
More
Activité biologique
Rohinitib (6.25-50 nM; 72 h) induces cell apoptosis of AML cell lines and FLT3-ITD-positive AML cell lines[1]. Primary AML cells is more sensitive to Rohinitib (25 nM; 72 h) than normal bone marrow (BM) and FLT3-ITD-positive cells is more sensitive to Rohinitib than FLT3 wild-type AML cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:AML cell lines
-
Concentration:6.25, 12.5, 25 and 50 nM
-
Incubation Time:72 h
-
Result:Dose-dependently induced apoptosis of MOLM-13, MOLM-14, MV4;11, OCI-AML3, THP-1, HL-60, Kasumi-1 and NB4 cell lines. And significantly induced cell apoptosis of FLT3-ITD, FLT3-ITD-expressing murine Ba/F3 and human OCI-AML3 cells.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female NSG mice with AML xenografts generated by intravenous injections of MOLM-13 cells[1]
-
Dosage:0.75 and 1.0 mg/kg
-
Administration:Subcutaneous injection; 0.75 and 1.0 mg/kg once daily 5 days a week until mice get moribund
-
Result:Significantly reduced the leukemia burden, circulating and BM leukemic human CD45+ cells. Dose-dependently prolonged the survival rate of mice.
Chemical Information
-
CAS No. 1139253-73-8
-
Appearance Solid
-
Masse moléculaire 521.56
-
Formule C29H31NO8
-
Color White to off-white
-
SMILES
COC1=CC=C([C@@]23OC4=CC(OC)=CC(OC)=C4[C@]2(O)[C@@H]([C@@H]([C@H]3C5=CC=CC=C5)C(N(OC)C)=O)O)C=C1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Biomed Pharmacother
Inhibition of NEDDylation enhances the cytostatic effect of Rohinitib on chronic lymphocytic leukemia cells. [Abstract]2025 Sep:190:118398. PMID: 40763483
Solvant et solubilité
DMSO : 200 mg/mL (383.46 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (9.59 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (283 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9173 mL | 9.5866 mL | 19.1732 mL | 47.9331 mL |
| 5 mM | 0.3835 mL | 1.9173 mL | 3.8346 mL | 9.5866 mL | |
| 10 mM | 0.1917 mL | 0.9587 mL | 1.9173 mL | 4.7933 mL | |
| 15 mM | 0.1278 mL | 0.6391 mL | 1.2782 mL | 3.1955 mL | |
| 20 mM | 0.0959 mL | 0.4793 mL | 0.9587 mL | 2.3967 mL | |
| 25 mM | 0.0767 mL | 0.3835 mL | 0.7669 mL | 1.9173 mL | |
| 30 mM | 0.0639 mL | 0.3196 mL | 0.6391 mL | 1.5978 mL | |
| 40 mM | 0.0479 mL | 0.2397 mL | 0.4793 mL | 1.1983 mL | |
| 50 mM | 0.0383 mL | 0.1917 mL | 0.3835 mL | 0.9587 mL | |
| 60 mM | 0.0320 mL | 0.1598 mL | 0.3196 mL | 0.7989 mL | |
| 80 mM | 0.0240 mL | 0.1198 mL | 0.2397 mL | 0.5992 mL | |
| 100 mM | 0.0192 mL | 0.0959 mL | 0.1917 mL | 0.4793 mL |
Rohinitib Related Classifications
HY-148422 Related Classifications
Powered by Bioz