Cav 2.2 blocker 2
Based on 1 Customer Validation
Cav 2.2 blocker 2 is a Cav2.2 calcium channel blocker extracted from patent WO2017046581A1, compound 1. Cav 2.2 blocker 2 can reverses hyperalgesia associated with an injury or inflammation in conjunction with the opioid.
For research use only. We do not sell to patients.
- Purity: 98.51%
- CAS No.: 1204535-44-3
- Formula: C19H20F3N3O3S
- Molecular Weight:427.44
-
Storage:
Please store the product under the recommended conditions in the Certificate of Analysis.
All Calcium Channel Isoforms
More
Biological Activity
|
N-type calcium channel |
Chemical Information
-
CAS No. 1204535-44-3
-
Appearance Solid
-
Molecular Weight 427.44
-
Formula C19H20F3N3O3S
-
Color White to off-white
-
SMILES
O=C(C1=CC=CN=C1C)N2[C@@H](C)CN(S(=O)(C3=CC=C(C(F)(F)F)C=C3)=O)CC2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Please store the product under the recommended conditions in the Certificate of Analysis.
Solvent & Solubility
DMSO : 100 mg/mL (233.95 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.85 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.85 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3395 mL | 11.6975 mL | 23.3951 mL | 58.4877 mL |
| 5 mM | 0.4679 mL | 2.3395 mL | 4.6790 mL | 11.6975 mL | |
| 10 mM | 0.2340 mL | 1.1698 mL | 2.3395 mL | 5.8488 mL | |
| 15 mM | 0.1560 mL | 0.7798 mL | 1.5597 mL | 3.8992 mL | |
| 20 mM | 0.1170 mL | 0.5849 mL | 1.1698 mL | 2.9244 mL | |
| 25 mM | 0.0936 mL | 0.4679 mL | 0.9358 mL | 2.3395 mL | |
| 30 mM | 0.0780 mL | 0.3899 mL | 0.7798 mL | 1.9496 mL | |
| 40 mM | 0.0585 mL | 0.2924 mL | 0.5849 mL | 1.4622 mL | |
| 50 mM | 0.0468 mL | 0.2340 mL | 0.4679 mL | 1.1698 mL | |
| 60 mM | 0.0390 mL | 0.1950 mL | 0.3899 mL | 0.9748 mL | |
| 80 mM | 0.0292 mL | 0.1462 mL | 0.2924 mL | 0.7311 mL | |
| 100 mM | 0.0234 mL | 0.1170 mL | 0.2340 mL | 0.5849 mL |