PEG4-aminooxy-MMAF
Based on 1 Customer Validation
PEG4-aminooxy-MMAF is a agent-linker conjugate for ADC with potent antitumor activity by using the potent antitubulin agent MMAF, linked via the noncleavable PEG4.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.83%
- CAS. Nr.: 1415246-35-3
- Formel: C47H82N6O12
- Molecular Weight:923.19
-
Speicherung:
-20°C, protect from light
* The compound is unstable in solutions, freshly prepared is recommended.
Alle Drug-Linker Conjugates for ADC Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
|
Auristatin |
Antibody-drug conjugates (ADCs) carry a highly potent small-molecule toxin covalently connected on the antibody via a proper linker. For therapeutic ADCs in cancer treatment, the antibody targets specific antigen of tumor cell surface with high binding affinity, thereafter the intact ADC was internalized into the tumor cells with the antigen and digested in the lysosome to release the antitumor toxin[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 1415246-35-3
-
Appearance Solid
-
Molecular Weight 923.19
-
Formel C47H82N6O12
-
Color White to off-white
-
SMILES
OC([C@H](CC1=CC=CC=C1)NC([C@H](C)[C@H]([C@@]2([H])N(CCC2)C(C[C@@H](OC)[C@H]([C@@H](C)CC)N(C)C([C@H](C(C)C)NC([C@H](C(C)C)N(C)CCOCCOCCOCCON)=O)=O)=O)OC)=O)=O
-
Synonyms
Amberstatin; AS269
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
-20°C, protect from light
* The compound is unstable in solutions, freshly prepared is recommended.
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (108.32 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 3 mg/mL (3.25 mM); Clear solution
This protocol yields a clear solution of ≥ 3 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (30.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 3 mg/mL (3.25 mM); Clear solution
This protocol yields a clear solution of ≥ 3 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (30.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * The compound is unstable in solutions, freshly prepared is recommended.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.0832 mL | 5.4160 mL | 10.8320 mL | 27.0800 mL |
| 5 mM | 0.2166 mL | 1.0832 mL | 2.1664 mL | 5.4160 mL | |
| 10 mM | 0.1083 mL | 0.5416 mL | 1.0832 mL | 2.7080 mL | |
| 15 mM | 0.0722 mL | 0.3611 mL | 0.7221 mL | 1.8053 mL | |
| 20 mM | 0.0542 mL | 0.2708 mL | 0.5416 mL | 1.3540 mL | |
| 25 mM | 0.0433 mL | 0.2166 mL | 0.4333 mL | 1.0832 mL | |
| 30 mM | 0.0361 mL | 0.1805 mL | 0.3611 mL | 0.9027 mL | |
| 40 mM | 0.0271 mL | 0.1354 mL | 0.2708 mL | 0.6770 mL | |
| 50 mM | 0.0217 mL | 0.1083 mL | 0.2166 mL | 0.5416 mL | |
| 60 mM | 0.0181 mL | 0.0903 mL | 0.1805 mL | 0.4513 mL | |
| 80 mM | 0.0135 mL | 0.0677 mL | 0.1354 mL | 0.3385 mL | |
| 100 mM | 0.0108 mL | 0.0542 mL | 0.1083 mL | 0.2708 mL |