NCGC1481
NCGC1481 is an inhibitor of FLT3, IRAK1, and IRAK4, with IC50 values of <0.5 nM, 22.6 nM, and 0.8 nM, respectively. NCGC1481 can effectively overcome the adaptive resistance of leukemia cells to FLT3 inhibitors and has antileukemic activity.
For research use only. We do not sell to patients.
- CAS No.: 2193085-94-6
- Formula: C21H23N7O
- Molecular Weight:389.45
-
Storage:
Please store the product under the recommended conditions in the Certificate of Analysis.
Biological Activity
Chemical Information
-
CAS No. 2193085-94-6
-
Molecular Weight 389.45
-
Formula C21H23N7O
-
SMILES
CN1N=CC(C2=CN3C(C=C2OC)=NC=C3C4=CC=CC(NC5CNCC5)=N4)=C1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Please store the product under the recommended conditions in the Certificate of Analysis.
Solvent & Solubility
DMSO : 100 mg/mL (256.77 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (12.84 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (12.84 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
References
Complete Stock Solution Preparation Table
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5677 mL | 12.8386 mL | 25.6772 mL | 64.1931 mL |
| 5 mM | 0.5135 mL | 2.5677 mL | 5.1354 mL | 12.8386 mL | |
| 10 mM | 0.2568 mL | 1.2839 mL | 2.5677 mL | 6.4193 mL | |
| 15 mM | 0.1712 mL | 0.8559 mL | 1.7118 mL | 4.2795 mL | |
| 20 mM | 0.1284 mL | 0.6419 mL | 1.2839 mL | 3.2097 mL | |
| 25 mM | 0.1027 mL | 0.5135 mL | 1.0271 mL | 2.5677 mL | |
| 30 mM | 0.0856 mL | 0.4280 mL | 0.8559 mL | 2.1398 mL | |
| 40 mM | 0.0642 mL | 0.3210 mL | 0.6419 mL | 1.6048 mL | |
| 50 mM | 0.0514 mL | 0.2568 mL | 0.5135 mL | 1.2839 mL | |
| 60 mM | 0.0428 mL | 0.2140 mL | 0.4280 mL | 1.0699 mL | |
| 80 mM | 0.0321 mL | 0.1605 mL | 0.3210 mL | 0.8024 mL | |
| 100 mM | 0.0257 mL | 0.1284 mL | 0.2568 mL | 0.6419 mL |