MCB-613
Based on 1 Customer Validation
MCB-613 is a potent Steroid receptor coactivator SRC small molecule ‘stimulator’ (SMS), super-stimulates SRCs’ transcriptional activity. MCB-613 increases SRCs’ interactions with other coactivators and markedly induces ER stress coupled to the generation of reactive oxygen species (ROS). MCB-613 is a SMS that target oncogenes can be exploited as anti-cancer agents by over-stimulating the SRC oncogenic program.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.61%
- CAS No.: 1162656-22-5
- Formule: C20H20N2O
- Masse moléculaire:304.39
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Immunology/Inflammation Compound Library
HY-L007
-
Metabolism/Protease Compound Library
HY-L012
-
NF-κB Signaling Compound Library
HY-L014
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
-
Endoplasmic Reticulum Stress Compound Library
HY-L054
-
Heterocyclic Compound Library
HY-L138
-
Cysteine Targeted Covalent Library
HY-L153
-
Cell Death Library
HY-L162
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
Activité biologique
MCB-613 (6-8 μM; 24 hours) activates endogenous MMP13 mRNA expression in MDA-MB-231 cells[1]. MCB-613 (2-10 μM; 4 hours) leads to proteasome dysfunction and ER stress, the induction of the markers for unfolded protein response (UPR), including the phosphorylation of eIF2α and IRE1α as well as the induction of ATF4 protein expression[1]. MCB-613 (0-7 μM; 4 hours) affects SRC-3 KO and WT HeLa cell viability, SRC-3 WT HeLa cell is more affected by MCB-613 compared with KO cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MDA-MB-231 cells
-
Concentration:6 μM; 8 μM
-
Incubation Time:24 hours
-
Result:Increased MMP13 mRNA expression.
-
Cell Line:HeLa cells
-
Concentration:2 μM; 4 μM; 6 μM; 8 μM; 10 μM
-
Incubation Time:24 hours
-
Result:Induced the p-eIF2α, p-IRE1α, and ATF-4 protein expression.
-
Cell Line:SRC-3 KO and WT HeLa cells
-
Concentration:3 μM; 4 μM; 5 μM; 6 μM; 7 μM
-
Incubation Time:24 hours
-
Result:Decreased SRC-3 KO and WT HeLa cell viability.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:MCF-7 breast cancer mouse xenograft model (athymic nude mice by injecting MCF-7 cells into mammary fat pads)[1]
-
Dosage:20 mg/kg
-
Administration:Intravenous injection; 20 mg/kg; 3 times/week; 7 weeks
-
Result:Inhibited tumor growth in vivo.
Chemical Information
-
CAS No. 1162656-22-5
-
Appearance Solid
-
Masse moléculaire 304.39
-
Formule C20H20N2O
-
Color Light yellow to yellow
-
SMILES
O=C1/C(CC(CC)C/C1=C\C2=CC=CN=C2)=C/C3=CC=CN=C3
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
DMSO : 50 mg/mL (164.26 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.21 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.21 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2853 mL | 16.4263 mL | 32.8526 mL | 82.1315 mL |
| 5 mM | 0.6571 mL | 3.2853 mL | 6.5705 mL | 16.4263 mL | |
| 10 mM | 0.3285 mL | 1.6426 mL | 3.2853 mL | 8.2131 mL | |
| 15 mM | 0.2190 mL | 1.0951 mL | 2.1902 mL | 5.4754 mL | |
| 20 mM | 0.1643 mL | 0.8213 mL | 1.6426 mL | 4.1066 mL | |
| 25 mM | 0.1314 mL | 0.6571 mL | 1.3141 mL | 3.2853 mL | |
| 30 mM | 0.1095 mL | 0.5475 mL | 1.0951 mL | 2.7377 mL | |
| 40 mM | 0.0821 mL | 0.4107 mL | 0.8213 mL | 2.0533 mL | |
| 50 mM | 0.0657 mL | 0.3285 mL | 0.6571 mL | 1.6426 mL | |
| 60 mM | 0.0548 mL | 0.2738 mL | 0.5475 mL | 1.3689 mL | |
| 80 mM | 0.0411 mL | 0.2053 mL | 0.4107 mL | 1.0266 mL | |
| 100 mM | 0.0329 mL | 0.1643 mL | 0.3285 mL | 0.8213 mL |
MCB-613 Related Classifications
HY-19625 Related Classifications
Powered by Bioz