SSR240612
Based on 2 publication(s) in Google Scholar
SSR240612 is a potent, and orally active specific non-peptide bradykinin B1 receptor antagonist, with Kis of 0.48 nM and 0.73 nM for B1 kinin receptors of human fibroblast MRC5 and HEK cells expressing human B1 receptors, 481 nM and 358 nM for B2 receptors of guinea pig ileum membranes and CHO cells expressing human B1 receptor, respectively.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.72%
- CAS No.: 464930-42-5
- Formule: C42H53ClN4O7S
- Masse moléculaire:793.41
-
Stockage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-17446
Icatibant -
HY-103290
R715 -
HY-15043
ELN-441958 -
HY-P0206
Bradykinin -
HY-17446R
Icatibant (Standard) -
HY-108896
Icatibant acetate -
![Lys-[Des-Arg9]Bradykinin TFA](https://file.medchemexpress.com/product_pic/hy-103295a.gif)
HY-103295A
Lys-[Des-Arg9]Bradykinin TFA -
HY-121156A
Anatibant hydrochloride -
HY-P1490
Bradykinin (2-9) -
HY-P1469
Bradykinin (1-6) -
![Sar-[D-Phe8]-des-Arg9-Bradykinin](https://file.medchemexpress.com/product_pic/hy-103291.gif)
HY-103291
Sar-[D-Phe8]-des-Arg9-Bradykinin -
HY-105155
Lobradimil
Publications Citing Use of MedChemExpress (MCE) SSR240612
MoreVoir tous les produits spécifiques à Isoform Bradykinin Receptor
More
Activité biologique
Description
IC50 & Target
|
Bradykinin B1 Receptor (B1R) |
In Vitro
SSR240612 is a potent bradykinin B1 receptor antagonist, with Kis of 0.48 nM and 0.73 nM for B2 kinin receptors of human fibroblast MRC5 and HEK cells expressing human B1 receptors, 481 nM and 358 nM for B1 receptors of guinea pig ileum membranes and CHO cells expressing human B1 receptor, respectively. SSR240612 inhibits inositol phosphate 1 formation with an IC50 of 1.9 nM, but shows no obvious effect on inositol phosphate-1 formation induced by BK (3 nM) activation of B2 receptor in human fibroblast MRC5[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 464930-42-5
-
Appearance Solid
-
Masse moléculaire 793.41
-
Formule C42H53ClN4O7S
-
Color White to off-white
-
SMILES
O=S(N[C@@H](C1=CC=C2C(OCO2)=C1)CC(N[C@@H](C(N(C)C(C)C)=O)CC3=CC=C(CN([C@@H]4C)[C@H](CCC4)C)C=C3)=O)(C5=CC(C=CC(OC)=C6)=C6C=C5)=O.Cl[H]
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Adv Sci (Weinh)
Epidermal METTL1-Mediated m7G Modification Drives Psoriatic Inflammation by Stabilizing Bdkrb1 and Orchestrating Neutrophil Recruitment. [Abstract]2026 Jun 9:e75970. PMID: 42261843 -
Solvant et solubilité
In Vitro:
DMSO : 50 mg/mL (63.02 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (3.15 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (3.15 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
Kinase Assay[1]
[3H]Lys0-des-Arg9-BK binding to cell membranes is performed in binding buffer of the following composition: 137 mM NaCl, 5.4 mM KCl, 1.05 mM MgCl2, 1.8 mM CaCl2, 1.2 mM NaH2PO4, 15.5 mM NaHCO3, 10 mM HEPES, 1 g/L bovine serum albumin (BSA), 140 mg/L bacitracin, and 1 μM captopril, pH 7.4. Membranes are incubated for 30 min at 25°C in 500 μL of binding buffer containing 1 nM [3H]Lys0-des-Arg9-BK for competition curves or 0.1 to 10 nM for saturation isotherms. Filters are washed three times with 5 mL of binding buffer, and radioactivity is determined by liquid scintillation spectrometry. Nonspecific binding is determined by the addition of 1 μM of unlabeled Lys0-des-Arg9BK[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Animal Administration[1]
Mice[1]
Groups of eight male albino mice under isoflurane anesthesia receive a 20-μL intraplantar injection into the right hind paw of 5 μg of IL-1β in phosphate-buffered saline/0.1% BSA. Forty minutes later (T = 0), mice under anesthesia receive a 20-μL intraplantar injection in the same paw of des-Arg9-BK (10 μg/paw) in water. SSR240612 or vehicle [5% (v/v) ethanol and 5% (v/v) Tween 80 in water] is administered by oral route at the doses of 1, 3, and 10 mg/kg 1 h before des-Arg9-BK injection and by intraperitoneal route at the doses of 0.1, 0.3, and 1 mg/kg 40 min before des-Arg9-BK injection. Paw volume is measured with a plethysmometer at T = -2 h (initial measurement) and at several times after edema induction (T = 20, 40, 60, and 120 min). Paw edema volume is expressed in milliliters as the difference between the paw volume at each time after edema induction and the initial paw volume. Results for each group are expressed as mean ± S.E.M. of individual paw edema volumes. Statistical analysis is performed after verification of normality and homogeneity of variances using repeated ANOVA, then Duncan's test, treated groups versus des-Arg9-BK control group[1].
Rats[1]
SSR240612 (suspended with 0.1% Tween 80 in saline) is administered by the oral route in a volume of 20 mL/kg, 2 h before the thermal hyperalgesia measurement. In the time course study, the compound is administered at 3 mg/kg p.o. 0.08, 0.25, 0.5, 1, 2, 4, 6, 8, and 24 h before measuring the withdrawal latencies in rats. Results are expressed in seconds as mean withdrawal latencies (s) ± S.E.M., and statistical analyses are performed using a two-way ANOVA followed by Dunnett's test[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (283 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Gougat J, et al. SSR240612 [(2R)-2-[((3R)-3-(1,3-benzodioxol-5-yl)-3-[[(6-methoxy-2-naphthyl)sulfonyl]amino]propanoyl)amino]-3-(4-[[2R,6S)-2,6-dimethylpiperidinyl]methyl]phenyl)-N-isopropyl-N-methylpropanamide hydrochloride], a new nonpeptide antagonist of the bradykinin B1 receptor: biochemical and pharmacological characterization. J Pharmacol Exp Ther. 2004 May;309(2):661-9. [Content Brief]
[2]. Dias JP, et al. The kinin B1 receptor antagonist SSR240612 reverses tactile and cold allodynia in an experimental rat model of insulin resistance. Br J Pharmacol. 2007 Sep;152(2):280-7. Epub 2007 Jul 9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.2604 mL | 6.3019 mL | 12.6038 mL | 31.5096 mL |
| 5 mM | 0.2521 mL | 1.2604 mL | 2.5208 mL | 6.3019 mL | |
| 10 mM | 0.1260 mL | 0.6302 mL | 1.2604 mL | 3.1510 mL | |
| 15 mM | 0.0840 mL | 0.4201 mL | 0.8403 mL | 2.1006 mL | |
| 20 mM | 0.0630 mL | 0.3151 mL | 0.6302 mL | 1.5755 mL | |
| 25 mM | 0.0504 mL | 0.2521 mL | 0.5042 mL | 1.2604 mL | |
| 30 mM | 0.0420 mL | 0.2101 mL | 0.4201 mL | 1.0503 mL | |
| 40 mM | 0.0315 mL | 0.1575 mL | 0.3151 mL | 0.7877 mL | |
| 50 mM | 0.0252 mL | 0.1260 mL | 0.2521 mL | 0.6302 mL | |
| 60 mM | 0.0210 mL | 0.1050 mL | 0.2101 mL | 0.5252 mL |
SSR240612 Related Classifications
HY-15039 Related Classifications
Powered by Bioz