AUTAC4
Based on 4 publication(s) in Google Scholar
AUTAC4 is a mitochondria-targeting autophagy-targeting chimera (AUTAC). AUTAC4 downregulates cytosolic proteins and promotes targeted mitochondrial turnover via mitophagy.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.22%
- CAS No.: 2267315-04-6
- Formule: C43H48FN9O8S
- Masse moléculaire:869.96
-
Stockage:
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) AUTAC4
More
Activité biologique
AUTAC4 induces K63-linked polyubiquitination. Accumulation of K63-linked polyubiquitin required approximately 8 h of incubation[1].
AUTAC4 suppresses not only cytochrome c release into the cytosol but also pro-caspase 3 cleavage. The intracellular ATP level after CCCP treatment is also maintained by AUTAC4, suggesting that mitophagy acceleration by AUTAC4 restored energy production by improving mitochondrial quality control. AUTAC4 rescues cells with acute mitochondrial injury by promoting mitophagy[1].
With the use of mito-Rosella, AUTAC4 (10 μM) can induce mitophagy in Detroit 532 cells ~24-72 h after treatment[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2267315-04-6
-
Appearance Solid
-
Masse moléculaire 869.96
-
Formule C43H48FN9O8S
-
Color White to light yellow
-
SMILES
O=C(NCCCOCCOCCOCCCNC([C@H](CSC1=NC2=C(N=C(N)NC2=O)N1CC3=CC=C(F)C=C3)NC(C)=O)=O)C(C4=C(C5=CC=CC=C5)NC6=C4C=CC=C6)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Adv Mater
High-Efficiency Targeted Mitochondrial Transfer and AUTAC4-Enhanced Dual Renewal Strategy for Rheumatoid Arthritis. [Abstract]2026 Feb 15:e14070. PMID: 41691414 -
Neural Regen Res
Mitophagy alleviates neuronal damage after subarachnoid hemorrhage: Role of autophagy-targeting chimera 4. [Abstract]2025 Oct 30. PMID: 41169210 -
-
Solvant et solubilité
DMSO : 170 mg/mL (195.41 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 4.25 mg/mL (4.89 mM); Clear solution
This protocol yields a clear solution of ≥ 4.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (42.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 4.25 mg/mL (4.89 mM); Clear solution
This protocol yields a clear solution of ≥ 4.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (42.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.1495 mL | 5.7474 mL | 11.4948 mL | 28.7370 mL |
| 5 mM | 0.2299 mL | 1.1495 mL | 2.2990 mL | 5.7474 mL | |
| 10 mM | 0.1149 mL | 0.5747 mL | 1.1495 mL | 2.8737 mL | |
| 15 mM | 0.0766 mL | 0.3832 mL | 0.7663 mL | 1.9158 mL | |
| 20 mM | 0.0575 mL | 0.2874 mL | 0.5747 mL | 1.4368 mL | |
| 25 mM | 0.0460 mL | 0.2299 mL | 0.4598 mL | 1.1495 mL | |
| 30 mM | 0.0383 mL | 0.1916 mL | 0.3832 mL | 0.9579 mL | |
| 40 mM | 0.0287 mL | 0.1437 mL | 0.2874 mL | 0.7184 mL | |
| 50 mM | 0.0230 mL | 0.1149 mL | 0.2299 mL | 0.5747 mL | |
| 60 mM | 0.0192 mL | 0.0958 mL | 0.1916 mL | 0.4789 mL | |
| 80 mM | 0.0144 mL | 0.0718 mL | 0.1437 mL | 0.3592 mL | |
| 100 mM | 0.0115 mL | 0.0575 mL | 0.1149 mL | 0.2874 mL |
AUTAC4 Related Classifications
HY-134640 Related Classifications
Powered by Bioz